KEYENCE EX-V Endüktif deplasman sensörleri

KEYENCE EX-V Endüktif deplasman ölçüm sensörleri

KEYENCE EX-V Endüktif deplasman ölçüm sensörleri metal nesnelerin hassas ve hızlı bir şekilde konumlarını ölçer. Metallarin kimyasal yapısı farklı olsada en doğru ölçüm sonuçlarının elde eldilmesini yüksek lineerlik ile sağlar. Yüksek hızlı örnekleme oranı ile mikron altı düzeyde bir hassasiyet ile ölçer. Sahip olduğu özel uygulama modları sayesinde üretim alanında ihtiyaç olan vibrasyon ve kalınlık ölçümünün yanında pres uygulamaları için geliştirilen presin inebileceği en alt noktanın ölçülmesini ve takip edilmesini sağlayan ölçümleri otomatik olarak yapar.

Özellikler

Max. 10mm’ye kadar ölçüm yapılmasını sağlayan sensör alternatifleri
Yüksek linnerlik (3µ) ve yüksek çözünürlükte (0,4µ) ölçümler
Montaj kolaylığı için metrik, silindirik yada ince dörtgen yapıda sensör alternatifleri
Saniyede 40.000 ölçüm yapabilme hızı
IP67 korumu sınıfı sayesinde zorlu koşullarda kullanım
Özel ölçüm modları sayesinde vibrasyon ve kalınlık ölçümlerinin otomatik yapılması
Presler için alt ölü nokta yakalama fonksiyonu ile verimlilik artışı
Tüm ayarlamaların yapıldığı dijital amfi ünitesi
Zamanlama ve farklı ölçümler için hafıza fonksiyonları
Ölçeklendirilebilen analog çıkış ve ayarlanabilir dijital çıkışlar

Uygulama Alanları

Metal nesnelerin konumu ve pozisyonlama ölçümü
Mesafe ve yükseklik ölçümleri
Salgı ve alpa ölçümleri
Aralık ve boşluk ölçümleri

Dokümanlar

Keyence EX-V Genel Katalog

Keyence EX-V Kullanım Kılavuzu

Teknik özellikler

EX-110

Model			EX-110
type			The sensor head
Amplifier unit			EX-202
shape			M10 screw type
Measurement range			0 to 2 mm
Analog output	Voltage output		0-5V (100Ω) ^{* 1}
	Current output		4-20mA (Applicable load 0 to 350Ω) ^{* 1}
	resolution		0.04% of FS (when response speed is LOW) ^{* 2}
	Straightness		± 1% of FS ^{* 1}
	responsiveness	At HIGH	15kHz (-3dB) ^{* 1}
		At LOW	1.3kHz (-3dB) ^{* 1}
Alarm output (disconnection alarm output)			NPN open collector maximum 100mA (40V or less) Residual voltage 1V or less (NC)
Secondary function			Auto zero function / responsiveness switching function
Temperature characteristics			0.03% of FS / ℃ ^{* 3}
Rated	Power supply voltage / current consumption		DC12-24V ± 10%, Ripple 10% (PP) or less / 240mA or less
	Current consumption		Up to 240 mA
Environmental resistance	Protective structure		IP67
	Operating ambient temperature		-10 to + 60 ° C (do not freeze)
	Operating ambient humidity		35-85% RH (no condensation)
	Vibration resistant		10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass	The sensor head		Approximately 55 g (including cord 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2 The} above specifications are for iron (S45C, SS400, t = 1 mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 3 When} the distance to the object is within 1/2 of the measurement range.

EX-110V

Model		EX-110V ^{* 1}^{* 2}
type		The sensor head
Amplifier unit		EX-V02 (P)
shape		M10 × 18 mm screw type
Measurement range		0 to 2 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		0.4 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input		NPN open collector or no-voltage contact signal
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	-10 to + 60 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		Approximately 55 g (including code 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-305V

Model		EX-305V ^{* 1}^{* 2}
type		The sensor head
Amplifier unit		EX-V01 (P)
shape		ø5.4 × 18 mm Cylindrical
Measurement range		0 to 1 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		0.4 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input		NPN open collector or no-voltage contact signal
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	-10 to + 60 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		Approximately 45 g (including code 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-416V

Model		EX-416V ^{* 1}^{* 2}
type		The sensor head
Amplifier unit		EX-V05 (P)
shape		ø 14.5 × 20 mm Cylinder + screw type
Measurement range		0-5 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		1 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input		NPN open collector or no-voltage contact signal
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	-10 to + 60 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		Approximately 75 g (including code 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-422V

Model		EX-422V ^{* 1}^{* 2}
type		The sensor head
Amplifier unit		EX-V10 (P)
shape		ø 22 × 35 mm Cylinder + screw type
Measurement range		0-10 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		2 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input		NPN open collector or no-voltage contact signal
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	-10 to + 60 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		Approximately 200 g (including code 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-614V

Model		EX-614V ^{* 1}^{* 2}
type		The sensor head
Amplifier unit		EX-V64 (P)
shape		14 x 30 x 4.8 mm thin
Measurement range		0-4 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		1 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input		NPN open collector or no-voltage contact signal
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	-10 to + 60 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		Approximately 60 g (including code 3 m)
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-V01P

Model		EX-V01P ^{* 1}
type		Amplifier unit PNP
shape		ø5.4 × 18 mm Cylindrical
Measurement range		0 to 1 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		0.4 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 2}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2 When} the distance to the object is within 1/2 of the measurement range

EX-V02P

Model		EX-V02P ^{* 1}
type		Amplifier unit PNP
shape		M10 × 18 mm screw type
Measurement range		0 to 2 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		0.4 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 2}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2 When} the distance to the object is within 1/2 of the measurement range

EX-V05E

Model		EX-V05E ^{* 1}^{* 2}
type		Amplifier unit
shape		ø 14.5 × 20 mm Cylinder + screw type
Measurement range		0-5 mm
A / D conversion method		Sequential conversion method
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		1 µm
Sampling speed		Up to 40,000 times / sec ^{* 3}
Display speed		20 times / sec
Display method		7-segment 3-color LED
Overrange warning		Display ± FFFF
Control input	Timing input	NPN open collector or no-voltage contact signal
	Reset input
	Auto zero input
	Judgment output prohibition input
	Synchronous / external setting input
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector up to 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Strobe output		NPN open collector up to 100mA (40V or less)
Alarm output
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 4}
Main functions		FLL function, digital filter function, auto zero function, offset function, calculation function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	DC 24 V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2 The} instruction manual is in English. ^{* 3 When} using a digital filter, 20000 times / sec ^{* 4 When} the distance to the object is within 1/2 of the measurement range

EX-V05P

Model		EX-V05P ^{* 1}
type		Amplifier unit PNP
shape		ø 14.5 × 20 mm Cylinder + screw type
Measurement range		0-5 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		1 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 2}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2 When} the distance to the object is within 1/2 of the measurement range

EX-V10

Model		EX-V10 ^{* 1}^{* 2}
type		Amplifier unit NPN
shape		ø 22 × 35 mm Cylinder + screw type
Measurement range		0-10 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		2 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input	Timing input	NPN open collector or no-voltage contact signal
	Reset input
	Auto zero input
	Judgment output prohibition input
	Synchronous / external setting input
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range

EX-V64

Model		EX-V64 ^{* 1}^{* 2}
type		Amplifier unit NPN
shape		14 x 30 x 4.8 mm thin
Measurement range		0-4 mm
Display range		-19999 to 19999
Straightness		± 0.3% of FS
Resolution (64 times average)		1 µm
Sampling speed		Maximum 40,000 times / sec (when using digital filter: 20000 times / sec)
Display speed		20 times / sec
Display method		7-segment 2-color LED
Overrange warning		Display ± FFFF
Control input	Timing input	NPN open collector or no-voltage contact signal
	Reset input
	Auto zero input
	Judgment output prohibition input
	Synchronous / external setting input
Control output	Setting method	Upper and lower limit 2 steps setting x 4 patterns (switching)
	signal	NPN open collector (HIGH, GO, LOW) Maximum 100mA (40V or less)
	Response time	0.075ms (at maximum speed)
	Off delay time	60ms (ON / OFF switchable)
Strobe output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NO)
Alarm output		NPN open collector maximum 100mA (40V or less), residual voltage 1V or less (NC)
Analog voltage output	Output voltage	± 5V
	Impedance	100Ω
	Response time	0.075ms (at maximum speed)
Temperature characteristics		0.07% of FS / ℃ ^{* 3}
Main functions		FLL circuit, digital filter function, auto zero function, offset function, measurement mode (15 types), judgment value memory function (4 sets), decimal point position / display digit change function, various error display functions, etc.
Rated	Power-supply voltage	24V ± 10%, Ripple (PP) 10% or less
	Current consumption	240 mA or less
Environmental resistance	Operating ambient temperature	0 to + 50 ° C
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
mass		About 235 g
^{* 1 The} above specifications are for iron (S45C, SS400, t = 1mm) to be detected. Please contact us for aluminum, copper, stainless steel, etc. ^{* 2} PNP output type is also available. Please contact us separately. ^{* 3 When} the distance to the object is within 1/2 of the measurement range