KEYENCE SZ Emniyet Lazer Alan Tarayıcı

AnasayfaTeknolojilerEndüstriyel Sensörler ve Makine EmniyetiMakine Emniyet ÜrünleriKEYENCE SZ Emniyet Lazer Alan Tarayıcı

KEYENCE SZ Güvenlik Lazer Alan Tarayıcı

KEYENCE SZ 270⁰ ve 4,2m (13.78′) alan taramalı otomatik alan çizimli tarayıcı

Avantajlar

Güvenlik lazer alan tarayıcısı, kullanıcıların her yerde, en karmaşık şekilli alanlarda bile koruma alanları oluşturmasına bile imkan tanır.
Yan veya dik montaj sayesinde ışın ekseni ayarlaması ve kablolama için gereken işçiliği azaltır.
Otomatik kılavuzlu araçlar üzerine monte edilerek, yavaşlatma, durdurma ve acil durdurma alanları tanımlanır.

Özellikler

PC ile bağlantı kurmadan, dijital ekranı sayesinde cihaz üzerinden programlayabilme
Tek tuşla, otomatik güvenlik alan çizimi
Çoklu güvenlik çıkışları ile 2 farklı alanın input gerekmeden eş şekilde korunması
Küçük döküm gövde ve 1,3kg ağırlık ile çok yönlü tarama
Durum bilgi ve durum bilgi çıkışı
16 adede kadar alan tanımlama, her biri için 3 alt alan tanımlama
USB kablo ile kolay konfigürasyon yazılımı
Koruma kılıfı ve değiştirilebilir ön cam kiti

Dokümanlar

Keyence SZ Güvenlik Lazer Alan Tarayıcı

Teknik Özellikler

SZ-01S

Model			SZ-01S
type			Single function type
Detection ability	Minimum detector		Diameter 30, 40, 50, 70, 150mm (depending on the setting) Reflectance 1.8% or more, speed 1.6m / s or less
	Detection angle range		270 ° (-45 ° to 225 °)
	Response time (ON → OFF)	Standard cycle (scan cycle A)	60ms (2 scans) to 480ms (16 scans)
		Different cycle (scan cycle B)	66ms (2 scans) to 528ms (16 scans)
	Response time (OFF → ON)	Standard cycle (scan cycle A)	ON → OFF response time + 125ms
		Different cycle (scan cycle B)
	Maximum protection area	Minimum detector 70 / 150mm	4.2m (-5 ° to 185 °), 2.8m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 50 mm	3.0m (-5 ° to 185 °), 2.0m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 40 mm	2.4m (-5 ° to 185 °), 1.6m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 30 mm	1.8m (-5 ° to 185 °), 1.2m (-45 ° to -5 °, 185 ° to 225 °)
	Maximum warning area (unsafe)	Minimum detector 70 / 150mm	10.0m (-5 ° to 185 °), 7.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 50 mm	7.5m (-5 ° to 185 °), 5.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 40 mm	6.0m (-5 ° to 185 °), 4.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 30 mm	4.5m (-5 ° to 185 °), 3.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
	Safe distance additional distance		100mm ^{* 2}
light source	Type, wavelength		Infrared laser diode 905nm
	Laser class		Class1 IEC / EN60825-1: 2007 Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No.50) Class 1 JIS C6802: 2005
OSSD output	Output type		PNP or NPN (switchable by connector cable) 2 outputs
	Maximum load current		500mA ^{* 3} (less than power supply voltage)
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
	Voltage at OFF		Maximum 2.0V (when cable is 5m)
	Leak current		Maximum 1mA ^{* 4}
	Maximum load capacity		2.2µF (when load resistance is 100Ω)
	Load wiring resistance		Maximum 2.5Ω ^{* 5}
Input (safety system)	Input resistance		4.4kΩ (input 1), 2.2kΩ (input 2)
Unsafe output (AUX output)	Output type		PNP / NPN totem pole output 2 outputs
	Maximum load current		50mA
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
Muting lamp output	(AUX6 output can be selected as muting lamp output)		―
cable length			30m or less ^{* 6}
Conformity standard	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE) IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061, (SIL2) EN ISO13849-1: 2015 (PLd, Category 3) ) UL508, UL1998
Rated	Power-supply voltage		When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
	power consumption		9.5W or less ( excluding load current of each output) 39W or less (including load current of each output)
Environmental resistance	Protective structure		IP65 (IEC60529) ^{* 7}
	Ambient illuminance used		Incandescent lamp 1,500 lux or less ^{* 8}
	Operating ambient temperature		-10 to + 50 ° C (do not freeze)
	Storage ambient temperature		-25 to + 60 ° C (do not freeze)
	Operating ambient humidity		35-85% RH (no condensation)
	Storage ambient humidity		35-95% RH
	Vibration resistant		10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance		100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	Body case		Aluminum die-cast, SPHC (bottom)
	window		Polycarbonate
mass			About 1.6 kg
^{* 1 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 2} If there is a high-reflectivity object within 1.5 m far from the boundary of the protected area, an additional 200 mm safety distance is required. (A total of 300 mm additional distance is required) ^{* 3 The} total load current of OSSD output and AUX output is 1.5 A or less when using a converter power supply, and 1.0 A or less when using a battery (when the cable length is 5 m or more). Is 0.5A or less). ^{* 4} Includes the state where the power is off or the power line is broken. ^{* 5} The wiring resistance between the OSSD output and the connected device (excluding the wiring resistance of the optional dedicated cable) should be 2.5Ω or less. However, if the load current is 300mA or more, set it to 1.0Ω or less. ^{* 6 When} power is supplied by a battery, it will be 10 m or less. ^{* 7} IP65 cannot be satisfied when the setting cover is open or the connector cable is not attached. ^{* 8} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-04M

Model			SZ-04M
type			Multi-function type
Detection ability	Minimum detector		Diameter 30, 40, 50, 70, 150mm (depending on the setting) Reflectance 1.8% or more, speed 1.6m / s or less
	Detection angle range		270 ° (-45 ° to 225 °)
	Response time (ON → OFF)	Standard cycle (scan cycle A)	60ms (2 scans) to 480ms (16 scans)
		Different cycle (scan cycle B)	66ms (2 scans) to 528ms (16 scans)
	Response time (OFF → ON)	Standard cycle (scan cycle A)	ON → OFF response time + 125ms
		Different cycle (scan cycle B)
	Maximum protection area	Minimum detector 70 / 150mm	4.2m (-5 ° to 185 °), 2.8m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 50 mm	3.0m (-5 ° to 185 °), 2.0m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 40 mm	2.4m (-5 ° to 185 °), 1.6m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 30 mm	1.8m (-5 ° to 185 °), 1.2m (-45 ° to -5 °, 185 ° to 225 °)
	Maximum warning area (unsafe)	Minimum detector 70 / 150mm	10.0m (-5 ° to 185 °), 7.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 50 mm	7.5m (-5 ° to 185 °), 5.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 40 mm	6.0m (-5 ° to 185 °), 4.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 30 mm	4.5m (-5 ° to 185 °), 3.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
	Safe distance additional distance		100mm ^{* 2}
light source	Type, wavelength		Infrared laser diode 905nm
	Laser class		Class1 IEC / EN60825-1: 2007 Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No.50) Class 1 JIS C6802: 2005
OSSD output	Output type		PNP or NPN (switchable by connector cable) 4 outputs
	Maximum load current		500mA ^{* 3} (less than power supply voltage)
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
	Voltage at OFF		Maximum 2.0V (when cable is 5m)
	Leak current		Maximum 1mA ^{* 4}
	Maximum load capacity		2.2µF (when load resistance is 100Ω)
	Load wiring resistance		Maximum 2.5Ω ^{* 5}
Input (safety system)	Input resistance		4.4kΩ (inputs 1, 3, 4, 5), 2.2kΩ (inputs 2, 6)
Unsafe output (AUX output)	Output type		PNP / NPN totem pole output 6 outputs
	Maximum load current		50mA
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
Muting lamp output	(AUX6 output can be selected as muting lamp output)		Can be connected to incandescent lamps (DC24V, 1 to 5.5W) and LED lamps (load current 10 to 230mA)
cable length			30m or less ^{* 6}
Conformity standard	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE) IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061, (SIL2) EN ISO13849-1: 2015 (PLd, Category 3) ) UL508, UL1998
Rated	Power-supply voltage		When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
	power consumption		9.5W or less ( excluding load current of each output) 50W or less (including load current of each output)
Environmental resistance	Protective structure		IP65 (IEC60529) ^{* 7}
	Ambient illuminance used		Incandescent lamp 1,500 lux or less ^{* 8}
	Operating ambient temperature		-10 to + 50 ° C (do not freeze)
	Storage ambient temperature		-25 to + 60 ° C (do not freeze)
	Operating ambient humidity		35-85% RH (no condensation)
	Storage ambient humidity		35-95% RH
	Vibration resistant		10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance		100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	Body case		Aluminum die-cast, SPHC (bottom)
	window		Polycarbonate
mass			About 1.6 kg
^{* 1 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 2} If there is a high-reflectivity object within 1.5 m far from the boundary of the protected area, an additional 200 mm safety distance is required. (A total of 300 mm additional distance is required) ^{* 3 The} total load current of OSSD output and AUX output is 1.5 A or less when using a converter power supply, and 1.0 A or less when using a battery (when the cable length is 5 m or more). Is 0.5A or less). ^{* 4} Includes the state where the power is off or the power line is broken. ^{* 5} The wiring resistance between the OSSD output and the connected device (excluding the wiring resistance of the optional dedicated cable) should be 2.5Ω or less. However, if the load current is 300mA or more, set it to 1.0Ω or less. ^{* 6 When} power is supplied by a battery, it will be 10 m or less. ^{* 7} IP65 cannot be satisfied when the setting cover is open or the connector cable is not attached. ^{* 8} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-16V

Model			SZ-16V
type			Multi-bank type
Detection ability	Minimum detector		Diameter 30, 40, 50, 70, 150mm (depending on the setting) Reflectance 1.8% or more, speed 1.6m / s or less
	Detection angle range		270 ° (-45 ° to 225 °)
	Response time (ON → OFF)	Standard cycle (scan cycle A)	60ms (2 scans) to 480ms (16 scans)
		Different cycle (scan cycle B)	66ms (2 scans) to 528ms (16 scans)
	Response time (OFF → ON)	Standard cycle (scan cycle A)	ON → OFF response time + 125ms
		Different cycle (scan cycle B)
	Maximum protection area	Minimum detector 70 / 150mm	4.2m (-5 ° to 185 °), 2.8m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 50 mm	3.0m (-5 ° to 185 °), 2.0m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 40 mm	2.4m (-5 ° to 185 °), 1.6m (-45 ° to -5 °, 185 ° to 225 °)
		Minimum detector 30 mm	1.8m (-5 ° to 185 °), 1.2m (-45 ° to -5 °, 185 ° to 225 °)
	Maximum warning area (unsafe)	Minimum detector 70 / 150mm	10.0m (-5 ° to 185 °), 7.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 50 mm	7.5m (-5 ° to 185 °), 5.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 40 mm	6.0m (-5 ° to 185 °), 4.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
		Minimum detector 30 mm	4.5m (-5 ° to 185 °), 3.0m (-45 ° to -5 °, 185 ° to 225 °) ^{* 1}
	Safe distance additional distance		100mm ^{* 2}
light source	Type, wavelength		Infrared laser diode 905nm
	Laser class		Class1 IEC / EN60825-1: 2007 Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No.50) Class 1 JIS C6802: 2005
OSSD output	Output type		PNP or NPN (switchable by connector cable) 2 outputs
	Maximum load current		500mA ^{* 3} (less than power supply voltage)
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
	Voltage at OFF		Maximum 2.0V (when cable is 5m)
	Leak current		Maximum 1mA ^{* 4}
	Maximum load capacity		2.2µF (when load resistance is 100Ω)
	Load wiring resistance		Maximum 2.5Ω ^{* 5}
Input (safety system)	Input resistance		4.4kΩ (input 1, 3-10), 2.2kΩ (input 2)
Unsafe output (AUX output)	Output type		PNP / NPN totem pole output 4 outputs
	Maximum load current		50mA
	Residual voltage (when ON)		Maximum 2.5V (when cable is 5m)
Muting lamp output	(AUX6 output can be selected as muting lamp output)		―
cable length			30m or less ^{* 6}
Conformity standard	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE) IEC61496-3, EN61496-3 (Type 3 AOPDDR) IEC61508, EN61508, IEC62061, EN62061, (SIL2) EN ISO13849-1: 2015 (PLd, Category 3) ) UL508, UL1998
Rated	Power-supply voltage		When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
	power consumption		10.5W or less (excluding load current of each output) 43W or less (including load current of each output)
Environmental resistance	Protective structure		IP65 (IEC60529) ^{* 7}
	Ambient illuminance used		Incandescent lamp 1,500 lux or less ^{* 8}
	Operating ambient temperature		-10 to + 50 ° C (do not freeze)
	Storage ambient temperature		-25 to + 60 ° C (do not freeze)
	Operating ambient humidity		35-85% RH (no condensation)
	Storage ambient humidity		35-95% RH
	Vibration resistant		10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance		100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	Body case		Aluminum die-cast, SPHC (bottom)
	window		Polycarbonate
mass			About 1.6 kg
^{* 1 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 2} If there is a high-reflectivity object within 1.5 m far from the boundary of the protected area, an additional 200 mm safety distance is required. (A total of 300 mm additional distance is required) ^{* 3 The} total load current of OSSD output and AUX output is 1.5 A or less when using a converter power supply, and 1.0 A or less when using a battery (when the cable length is 5 m or more). Is 0.5A or less). ^{* 4} Includes the state where the power is off or the power line is broken. ^{* 5} The wiring resistance between the OSSD output and the connected device (excluding the wiring resistance of the optional dedicated cable) should be 2.5Ω or less. However, if the load current is 300mA or more, set it to 1.0Ω or less. ^{* 6 When} power is supplied by a battery, it will be 10 m or less. ^{* 7} IP65 cannot be satisfied when the setting cover is open or the connector cable is not attached. ^{* 8} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-V04

Model				SZ-V04 ^{* 1}
type				Multi-function type
Detection ability	Minimum detector			Diameter 20, 30, 40, 50, 70, 150 mm (depending on the setting) Reflectance 1.8% or more, speed 1.6 m / s or less ^{* 2}
	Detection angle range			190 ° (-5 ° to 185 °)
	Response time (ON → OFF)	Standard mode	Scan cycle A	160ms (2 scans) to 1280ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	168ms (2 scans) -1344ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	176ms (2 scans) -1408ms (16 scans) ^{* 3}^{* 4}
		High speed mode	Scan cycle A	80ms (2 scans) to 640ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	84ms (2 scans) to 672ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	88ms (2 scans) to 704ms (16 scans) ^{* 3}^{* 4}
	Response time (OFF → ON)			ON → OFF response time + 150ms
	Protected area	Minimum detector ø70, ø150		Standard mode: 8.4m High speed mode: 5.7m
		Minimum detector ø50		Standard mode: 5.6m High speed mode: 3.8m
		Minimum detector ø40		Standard mode: 4.3m High speed mode: 2.9m
		Minimum detector ø30		Standard mode: 2.9m High speed mode: 2.0m
		Minimum detector ø20		Standard mode: 1.6m High speed mode: 1.1m
	Warning area	Minimum detector ø70, ø150		Standard mode: 26m High speed mode: 23m ^{* 5}
		Minimum detector ø50		Standard mode: 25m High speed mode: 21m ^{* 5}
		Minimum detector ø40		Standard mode: 24m High speed mode: 20m ^{* 5}
		Minimum detector ø30		Standard mode: 23m High speed mode: 18m ^{* 5}
		Minimum detector ø20		Standard mode: 21m High speed mode: 15m ^{* 5}
	Safe distance additional distance			100mm ^{* 6}
	Maximum display distance / maximum distance measurement output distance			60m ^{* 7}
Number of banks				Up to 4 banks
Head expansion				Up to 3
camera				― ^{* 8}
display				QVGA 2.2-inch color LCD display
light source	Type, wavelength			Infrared laser diode 905nm
	Laser class	IEC		Class1 IEC / EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No. 50) ^{* 9}
		JIS		Class 1 JIS C 6802
Control output (OSSD output)	Output type			PNP or NPN transistor output (setting switching with SZ-V Configurator)
	Number of outputs			4 outputs
	Maximum load current			500mA ^{* 10}
	Residual voltage			Maximum 2.5V (when cable is 5m)
	Voltage at OFF			Maximum 2.0V (when cable is 5m)
	Leak current			Maximum 1mA ^{* 11}
	Maximum load capacity			2.2µF (when load resistance is 100Ω)
	Load wiring resistance			Up to 2.5Ω
Input (safety system)	PNP			ON voltage: 10 to 30V OFF voltage: open or 0 to 3V short circuit current: approx. 2.5mA (EDM input approx. 10mA)
	NPN			ON voltage: 0 to 3V OFF voltage: Open or 10V to power supply voltage Short circuit current: Approximately 2.5mA (EDM input approximately 10mA)
Unsafe output (AUX output)	Output type			Transistor output (switching settings with PNP or NPN SZ-V Configurator)
	Number of outputs			6 outputs
	Maximum load current			50mA
	Residual voltage when ON			Maximum 2.5V (when cable is 5m)
	Muting lamp			Can be connected to incandescent lamps (DC24V, 1-5.5W) and LED lamps (load current 10-230mA)
interface	USB			USB2.0
	Ethernet	standard		―
		Transmission speed
		cable
		connector
Network data output
cable length	power cable			30m or less ^{* 12}
	Connecting cable			20m or less ^{* 13}
	Ethernet cable			―
Conformity standard	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2 / SILCL2), EN ISO13849-1: 2015 ( PLd, Category 3), IEC61784-3-3 , UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rated	power consumption			11.8W (without load) 55.0W (with load) ^{* 14}
	Power-supply voltage			When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
Environmental resistance	Protective structure			IP65 (IEC60529)
	Ambient illuminance used			Incandescent lamp 1,500 lux or less ^{* 15}
	Operating ambient temperature			-10 to + 50 ° C (do not freeze)
	Storage ambient temperature			-25 to + 60 ° C (do not freeze)
	Operating ambient humidity			35-85% RH (no condensation)
	Storage ambient humidity			35-95% RH
	Vibration resistant			10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance			100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	head	Body case		magnesium
		window		Polycarbonate, PEI
		Indicator light section		― ^{* 8}
	Display unit	Case		Magnesium, PPS, polycarbonate
	System memory			Aluminum, PPE
mass				About 2,100 g
^{* 1 The} set model includes the display unit, scanner head, system memory, and connection cable (SZ-VS005). ^{* 2 When an} object penetrates vertically into the detection surface, SZ-V cannot detect an object moving at a speed exceeding 1.6 m / s regardless of the encoder settings. ^{* 3 The} response time, protection area, and warning area are determined by the operation mode. ^{* 4} 6ms added when using PROFIsafe. ^{* 5 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 6} If there is a high-reflectivity object within 1.5m away from the boundary of the protected area, an additional 200mm safety distance is required. ^{* 7} Even when using network data output, the maximum distance measurement output distance is 60 m. ^{* 8} Only for types with a camera. ^{* 9} Classification is carried out according to the criteria of IEC60825-1 according to Laser Notice No.50 of FDA (CDRH). ^{* 10 The} total load current of OSSD output and AUX output should be 1.5A or less when using one head, 1.0A or less when using two heads, and 0.5A or less when using three heads. ^{* 11} Including when the power is off. ^{* 12 When} power is supplied by a battery, it will be 10 m or less. ^13When supplying power from a battery, the length of each connecting cable should be 10 m or less when using two heads and 5 m or less when using three heads. ^{ 14 When} adding and using additional heads, it is necessary to add 9.4W per head. In addition, the power consumption may increase momentarily only at startup (up to 3.6W). When you move to normal operation, the power consumption will be within the rated range. ^{* 15} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-V32

Model				SZ-V32 ^{* 1}
type				Multi-bank type
Detection ability	Minimum detector			Diameter 20, 30, 40, 50, 70, 150 mm (depending on the setting) Reflectance 1.8% or more, speed 1.6 m / s or less ^{* 2}
	Detection angle range			190 ° (-5 ° to 185 °)
	Response time (ON → OFF)	Standard mode	Scan cycle A	160ms (2 scans) to 1280ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	168ms (2 scans) -1344ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	176ms (2 scans) -1408ms (16 scans) ^{* 3}^{* 4}
		High speed mode	Scan cycle A	80ms (2 scans) to 640ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	84ms (2 scans) to 672ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	88ms (2 scans) to 704ms (16 scans) ^{* 3}^{* 4}
	Response time (OFF → ON)			ON → OFF response time + 150ms
	Protected area	Minimum detector ø70, ø150		Standard mode: 8.4m High speed mode: 5.7m
		Minimum detector ø50		Standard mode: 5.6m High speed mode: 3.8m
		Minimum detector ø40		Standard mode: 4.3m High speed mode: 2.9m
		Minimum detector ø30		Standard mode: 2.9m High speed mode: 2.0m
		Minimum detector ø20		Standard mode: 1.6m High speed mode: 1.1m
	Warning area	Minimum detector ø70, ø150		Standard mode: 26m High speed mode: 23m ^{* 5}
		Minimum detector ø50		Standard mode: 25m High speed mode: 21m ^{* 5}
		Minimum detector ø40		Standard mode: 24m High speed mode: 20m ^{* 5}
		Minimum detector ø30		Standard mode: 23m High speed mode: 18m ^{* 5}
		Minimum detector ø20		Standard mode: 21m High speed mode: 15m ^{* 5}
	Safe distance additional distance			100mm ^{* 6}
	Maximum display distance / maximum distance measurement output distance			60m ^{* 7}
Number of banks				Up to 32 banks
Head expansion				Up to 3
camera				― ^{* 8}
display				QVGA 2.2-inch color LCD display
light source	Type, wavelength			Infrared laser diode 905nm
	Laser class	IEC		Class1 IEC / EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No. 50) ^{* 9}
		JIS		Class 1 JIS C 6802
Control output (OSSD output)	Output type			PNP or NPN transistor output (setting switching with SZ-V Configurator)
	Number of outputs			2 outputs
	Maximum load current			500mA ^{* 10}
	Residual voltage			Maximum 2.5V (when cable is 5m)
	Voltage at OFF			Maximum 2.0V (when cable is 5m)
	Leak current			Maximum 1mA ^{* 11}
	Maximum load capacity			2.2µF (when load resistance is 100Ω)
	Load wiring resistance			Up to 2.5Ω
Input (safety system)	PNP			ON voltage: 10 to 30V OFF voltage: open or 0 to 3V short circuit current: approx. 2.5mA (EDM input approx. 10mA)
	NPN			ON voltage: 0 to 3V OFF voltage: Open or 10V to power supply voltage Short circuit current: Approximately 2.5mA (EDM input approximately 10mA)
Unsafe output (AUX output)	Output type			Transistor output (switching settings with PNP or NPN SZ-V Configurator)
	Number of outputs			4 outputs
	Maximum load current			50mA
	Residual voltage when ON			Maximum 2.5V (when cable is 5m)
	Muting lamp			―
interface	USB			USB2.0
	Ethernet	standard		―
		Transmission speed
		cable
		connector
Network data output
cable length	power cable			30m or less ^{* 12}
	Connecting cable			20m or less ^{* 13}
	Ethernet cable			―
Conformity standard	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2 / SILCL2), EN ISO13849-1: 2015 ( PLd, Category 3), IEC61784-3-3 , UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rated	power consumption			11.8W (without load) 55.0W (with load) ^{* 14}
	Power-supply voltage			When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
Environmental resistance	Protective structure			IP65 (IEC60529)
	Ambient illuminance used			Incandescent lamp 1,500 lux or less ^{* 15}
	Operating ambient temperature			-10 to + 50 ° C (do not freeze)
	Storage ambient temperature			-25 to + 60 ° C (do not freeze)
	Operating ambient humidity			35-85% RH (no condensation)
	Storage ambient humidity			35-95% RH
	Vibration resistant			10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance			100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	head	Body case		magnesium
		window		Polycarbonate, PEI
		Indicator light section		― ^{* 8}
	Display unit	Case		Magnesium, PPS, polycarbonate
	System memory			Aluminum, PPE
mass				About 2,100 g
^{* 1 The} set model includes the display unit, scanner head, system memory, and connection cable (SZ-VS005). ^{* 2 When an} object penetrates vertically into the detection surface, SZ-V cannot detect an object moving at a speed exceeding 1.6 m / s regardless of the encoder settings. ^{* 3 The} response time, protection area, and warning area are determined by the operation mode. ^{* 4} 6ms added when using PROFIsafe. ^{* 5 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 6} If there is a high-reflectivity object within 1.5m away from the boundary of the protected area, an additional 200mm safety distance is required. ^{* 7} Even when using network data output, the maximum distance measurement output distance is 60 m. ^{* 8} Only for types with a camera. ^{* 9} Classification is carried out according to the criteria of IEC60825-1 according to Laser Notice No.50 of FDA (CDRH). ^{* 10 The} total load current of OSSD output and AUX output should be 1.5A or less when using one head, 1.0A or less when using two heads, and 0.5A or less when using three heads. ^{* 11} Including when the power is off. ^{* 12 When} power is supplied by a battery, it will be 10 m or less. ^13When supplying power from a battery, the length of each connecting cable should be 10 m or less when using two heads and 5 m or less when using three heads. ^{ 14 When} adding and using additional heads, it is necessary to add 9.4W per head. In addition, the power consumption may increase momentarily only at startup (up to 3.6W). When you move to normal operation, the power consumption will be within the rated range. ^{* 15} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-V32N

Model				SZ-V32N ^{* 1}
type				Communication type
Detection ability	Minimum detector			Diameter 20, 30, 40, 50, 70, 150 mm (depending on the setting) Reflectance 1.8% or more, speed 1.6 m / s or less ^{* 2}
	Detection angle range			190 ° (-5 ° to 185 °)
	Response time (ON → OFF)	Standard mode	Scan cycle A	160ms (2 scans) to 1280ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	168ms (2 scans) -1344ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	176ms (2 scans) -1408ms (16 scans) ^{* 3}^{* 4}
		High speed mode	Scan cycle A	80ms (2 scans) to 640ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	84ms (2 scans) to 672ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	88ms (2 scans) to 704ms (16 scans) ^{* 3}^{* 4}
	Response time (OFF → ON)			ON → OFF response time + 150ms
	Protected area	Minimum detector ø70, ø150		Standard mode: 8.4m High speed mode: 5.7m
		Minimum detector ø50		Standard mode: 5.6m High speed mode: 3.8m
		Minimum detector ø40		Standard mode: 4.3m High speed mode: 2.9m
		Minimum detector ø30		Standard mode: 2.9m High speed mode: 2.0m
		Minimum detector ø20		Standard mode: 1.6m High speed mode: 1.1m
	Warning area	Minimum detector ø70, ø150		Standard mode: 26m High speed mode: 23m ^{* 5}
		Minimum detector ø50		Standard mode: 25m High speed mode: 21m ^{* 5}
		Minimum detector ø40		Standard mode: 24m High speed mode: 20m ^{* 5}
		Minimum detector ø30		Standard mode: 23m High speed mode: 18m ^{* 5}
		Minimum detector ø20		Standard mode: 21m High speed mode: 15m ^{* 5}
	Safe distance additional distance			100mm ^{* 6}
	Maximum display distance / maximum distance measurement output distance			60m ^{* 7}
Number of banks				Up to 32 banks ^{* 8}
Head expansion				Up to 3
camera				― ^{* 9}
display				QVGA 2.2-inch color LCD display
light source	Type, wavelength			Infrared laser diode 905nm
	Laser class	IEC		Class1 IEC / EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No. 50) ^{* 10}
		JIS		Class 1 JIS C 6802
Control output (OSSD output)	Output type			PNP or NPN transistor output (setting switching with SZ-V Configurator)
	Number of outputs			2 outputs
	Maximum load current			500mA ^{* 11}
	Residual voltage			Maximum 2.5V (when cable is 5m)
	Voltage at OFF			Maximum 2.0V (when cable is 5m)
	Leak current			Maximum 1mA ^{* 12}
	Maximum load capacity			2.2µF (when load resistance is 100Ω)
	Load wiring resistance			Up to 2.5Ω
Input (safety system)	PNP			ON voltage: 10 to 30V OFF voltage: open or 0 to 3V short circuit current: approx. 2.5mA (EDM input approx. 10mA)
	NPN			ON voltage: 0 to 3V OFF voltage: Open or 10V to power supply voltage Short circuit current: Approximately 2.5mA (EDM input approximately 10mA)
Unsafe output (AUX output)	Output type			Transistor output (switching settings with PNP or NPN SZ-V Configurator)
	Number of outputs			4 outputs
	Maximum load current			50mA
	Residual voltage when ON			Maximum 2.5V (when cable is 5m)
	Muting lamp			Can be connected to incandescent lamps (DC24V, 1-5.5W) and LED lamps (load current 10-230mA)
interface	USB			USB2.0
	Ethernet	standard		IEEE 802.3u (100BASE-TX)
		Transmission speed		100Mbps
		cable		Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable
		connector		RJ45 (IP65 connector) 2 ports
Network data output				EtherNet / IP, PROFINET, PROFIsafe, UDP
cable length	power cable			30m or less ^{* 13}
	Connecting cable			20m or less ^{* 14}
	Ethernet cable			100m or less ^{* 15}
Conformity standard	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2 / SILCL2), EN ISO13849-1: 2015 ( PLd, Category 3), IEC61784-3-3 , UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rated	power consumption			13.4W (without load) 50.8W (with load) ^{* 16}
	Power-supply voltage			When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
Environmental resistance	Protective structure			IP65 (IEC60529)
	Ambient illuminance used			Incandescent lamp 1,500 lux or less ^{* 17}
	Operating ambient temperature			-10 to + 50 ° C (do not freeze)
	Storage ambient temperature			-25 to + 60 ° C (do not freeze)
	Operating ambient humidity			35-85% RH (no condensation)
	Storage ambient humidity			35-95% RH
	Vibration resistant			10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance			100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	head	Body case		magnesium
		window		Polycarbonate, PEI
		Indicator light section		― ^{* 9}
	Display unit	Case		Magnesium, PPS, polycarbonate
	System memory			Aluminum, PPE
mass				About 2,300 g
^{* 1 The} set model includes the display unit, scanner head, system memory, and connection cable (SZ-VS005). ^{* 2 When an} object penetrates vertically into the detection surface, SZ-V cannot detect an object moving at a speed exceeding 1.6 m / s regardless of the encoder settings. ^{* 3 The} response time, protection area, and warning area are determined by the operation mode. ^{* 4} 6ms added when using PROFIsafe. ^{* 5 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 6} If there is a high-reflectivity object within 1.5m away from the boundary of the protected area, an additional 200mm safety distance is required. ^{* 7} Even when using network data output, the maximum distance measurement output distance is 60 m. ^{* 8} Up to 16 banks when using PROFIsafe. ^{* 9} Only with camera type. ^{* 10 In accordance with} FDA (CDRH) Laser Notice No.50, classification is carried out according to IEC60825-1 standards. ^{* 11 The} total load current of OSSD output and AUX output should be 1.2A or less when using one head, 0.8A or less when using two heads, and 0.3A or less when using three heads. ^{* 12} Including when the power is off. ^13When power is supplied by a battery, it will be 10 m or less. ^{ 14 When} supplying power from a battery, the length of each connecting cable should be 10 m or less when using two heads and 5 m or less when using three heads. ^{* 15} Length between SZ-V and Ethernet switch. ^{* 16 When} adding and using additional heads, it is necessary to add 9.4W per head. In addition, the power consumption may increase momentarily only at startup (up to 3.6W). When you move to normal operation, the power consumption will be within the rated range. ^{* 17} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-V32X

Model				SZ-V32X ^{* 1}
type				Multi-bank type
Detection ability	Minimum detector			Diameter 20, 30, 40, 50, 70, 150 mm (depending on the setting) Reflectance 1.8% or more, speed 1.6 m / s or less ^{* 2}
	Detection angle range			190 ° (-5 ° to 185 °)
	Response time (ON → OFF)	Standard mode	Scan cycle A	160ms (2 scans) to 1280ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	168ms (2 scans) -1344ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	176ms (2 scans) -1408ms (16 scans) ^{* 3}^{* 4}
		High speed mode	Scan cycle A	80ms (2 scans) to 640ms (16 scans) ^{* 3}^{* 4}
			Scan cycle B	84ms (2 scans) to 672ms (16 scans) ^{* 3}^{* 4}
			Scan cycle C	88ms (2 scans) to 704ms (16 scans) ^{* 3}^{* 4}
	Response time (OFF → ON)			ON → OFF response time + 150ms
	Protected area	Minimum detector ø70, ø150		Standard mode: 8.4m High speed mode: 5.7m
		Minimum detector ø50		Standard mode: 5.6m High speed mode: 3.8m
		Minimum detector ø40		Standard mode: 4.3m High speed mode: 2.9m
		Minimum detector ø30		Standard mode: 2.9m High speed mode: 2.0m
		Minimum detector ø20		Standard mode: 1.6m High speed mode: 1.1m
	Warning area	Minimum detector ø70, ø150		Standard mode: 26m High speed mode: 23m ^{* 5}
		Minimum detector ø50		Standard mode: 25m High speed mode: 21m ^{* 5}
		Minimum detector ø40		Standard mode: 24m High speed mode: 20m ^{* 5}
		Minimum detector ø30		Standard mode: 23m High speed mode: 18m ^{* 5}
		Minimum detector ø20		Standard mode: 21m High speed mode: 15m ^{* 5}
	Safe distance additional distance			100mm ^{* 6}
	Maximum display distance / maximum distance measurement output distance			60m ^{* 7}
Number of banks				Up to 32 banks
Head expansion				Up to 3
camera				Viewing angle 190 ° or more (-5 ° to 185 °) ^{* 8}
display				QVGA 2.2-inch color LCD display
light source	Type, wavelength			Infrared laser diode 905nm
	Laser class	IEC		Class1 IEC / EN60825-1
		FDA		Class1 FDA 21CFR 1040.10, 1040.11 (Laser Notice No. 50) ^{* 9}
		JIS		Class 1 JIS C 6802
Control output (OSSD output)	Output type			PNP or NPN transistor output (setting switching with SZ-V Configurator)
	Number of outputs			2 outputs
	Maximum load current			500mA ^{* 10}
	Residual voltage			Maximum 2.5V (when cable is 5m)
	Voltage at OFF			Maximum 2.0V (when cable is 5m)
	Leak current			Maximum 1mA ^{* 11}
	Maximum load capacity			2.2µF (when load resistance is 100Ω)
	Load wiring resistance			Up to 2.5Ω
Input (safety system)	PNP			ON voltage: 10 to 30V OFF voltage: open or 0 to 3V short circuit current: approx. 2.5mA (EDM input approx. 10mA)
	NPN			ON voltage: 0 to 3V OFF voltage: Open or 10V to power supply voltage Short circuit current: Approximately 2.5mA (EDM input approximately 10mA)
Unsafe output (AUX output)	Output type			Transistor output (switching settings with PNP or NPN SZ-V Configurator)
	Number of outputs			4 outputs
	Maximum load current			50mA
	Residual voltage when ON			Maximum 2.5V (when cable is 5m)
	Muting lamp			―
interface	USB			USB2.0
	Ethernet	standard		―
		Transmission speed
		cable
		connector
Network data output
cable length	power cable			30m or less ^{* 12}
	Connecting cable			20m or less ^{* 13}
	Ethernet cable			―
Conformity standard	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE)
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	safety			IEC61496-1, EN61496-1, UL61496-1 (Type 3 ESPE), IEC61496-3, EN61496-3 (Type 3 AOPDDR), IEC61508, EN61508, IEC62061, EN62061 (SIL2 / SILCL2), EN ISO13849-1: 2015 ( PLd, Category 3), IEC61784-3-3 , UL508, UL1998, CSA C22.2 No.14, CSA C22.2 No.0.8
Rated	power consumption			11.8W (without load) 55.0W (with load) ^{* 14}
	Power-supply voltage			When using converter power supply: DC 24 V ± 10%, Ripple (PP) 10% or less When using battery: DC 24 V + 20% / -30%
Environmental resistance	Protective structure			IP65 (IEC60529)
	Ambient illuminance used			Incandescent lamp 1,500 lux or less ^{* 15}
	Operating ambient temperature			-10 to + 50 ° C (do not freeze)
	Storage ambient temperature			-25 to + 60 ° C (do not freeze)
	Operating ambient humidity			35-85% RH (no condensation)
	Storage ambient humidity			35-95% RH
	Vibration resistant			10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
	Impact resistance			100 m / s ² (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material	head	Body case		magnesium
		window		Polycarbonate, PEI
		Indicator light section		Aluminum, PES ^{* 8}
	Display unit	Case		Magnesium, PPS, polycarbonate
	System memory			Aluminum, PPE
mass				About 2,100 g
^{* 1 The} set model includes the display unit, scanner head, system memory, and connection cable (SZ-VS005). ^{* 2 When an} object penetrates vertically into the detection surface, SZ-V cannot detect an object moving at a speed exceeding 1.6 m / s regardless of the encoder settings. ^{* 3 The} response time, protection area, and warning area are determined by the operation mode. ^{* 4} 6ms added when using PROFIsafe. ^{* 5 In the} warning area, the reflectance of the detector must be 20% or more. ^{* 6} If there is a high-reflectivity object within 1.5m away from the boundary of the protected area, an additional 200mm safety distance is required. ^{* 7} Even when using network data output, the maximum distance measurement output distance is 60 m. ^{* 8} Only for types with a camera. ^{* 9} Classification is carried out according to the criteria of IEC60825-1 according to Laser Notice No.50 of FDA (CDRH). ^{* 10 The} total load current of OSSD output and AUX output should be 1.5A or less when using one head, 1.0A or less when using two heads, and 0.5A or less when using three heads. ^{* 11} Including when the power is off. ^{* 12 When} power is supplied by a battery, it will be 10 m or less. ^13When supplying power from a battery, the length of each connecting cable should be 10 m or less when using two heads and 5 m or less when using three heads. ^{ 14 When} adding and using additional heads, it is necessary to add 9.4W per head. In addition, the power consumption may increase momentarily only at startup (up to 3.6W). When you move to normal operation, the power consumption will be within the rated range. ^{* 15} Do not place a disturbance light source within ± 5 ° with respect to the detection surface.

SZ-VH1

Model				SZ-VH1
type				Standard type
mass				About 1,600 g

SZ-VH1X

Model				SZ-VH1X
type				Camera type
mass				About 1,600 g

SZ-VU32

Model				SZ-VU32
type				Multi-bank type
mass				About 420 g

SZ-VU32N

Model				SZ-VU32N
type				Communication type
mass				About 600 g

KEYENCE SZ Güvenlik Lazer Alan Tarayıcı

Avantajlar

Özellikler

Dokümanlar

Teknik Özellikler

Teknolojiler

Çözümler

İletişim