Kompakt Boyut, Kararlı Algılama
KEYENCE LR-X Lazer Sensör
• Küçük alanlarda bile eşsiz kararlılık
• Dünyadaki ilk yeşil lazer CMOS sensörü
• Hedefleri özelliklerinden bağımsız olarak algılama
• Kolay kurulum, ayrıntılı OLED ekran
LR-X Serisi CMOS Lazer Sensör
LR-X serisi, hedefleri konumuna göre algılayabilen ve aynı zamanda renk, yüzey ve şekil özelliklerinden etkilenmeyen kompakt ve kararlı bir lazer sensördür. Gıda endüstrisinde kullanılan paslanmaz çelik gövdesi (SUS316L), yüksek IP derecesi ve korumalı kablosu ile etkileyici bir dayanıklılık sunar.
Entek’e Sor | +90 850 201 41 41
Özellikler
Her Alanda Kullanıma Uygun Kompakt ve Sağlam Tasarım
İster yeni bir makine inşa edin ister eski bir makineyi yenileyin, LR-X Serisinin ultra kompakt boyutu her alana entegre edilmesini kolaylaştırır. Metal gövdesi ve sağlam tasarımı da her ortamda uzun ömürlü olmasını sağlar.
Herhangi Bir Hedefin Kararlı Algılanması İçin
Gereken Minimum Saptanabilir Konum Değişikliği: 0,5 mm 0.02″
LR-X serisi hedefleri ışık yoğunluğuna göre değil konuma göre algılar. Bu; renk, yüzey kalitesi veya şekilden bağımsız olarak hedeflerin kararlı bir şekilde algılanmasını sağlar. LR-X serisi ufak pozisyon değişiklikleri de dahil olmak üzere çok çeşitli uygulamalarda kullanılabilmektedir.
Parlak Hedefler
Kavisli Hedefler
Koyu Hedefler
Renkli Hedefler
Farklı Açılı Hedefler
Benzersiz Kullanım Kolaylığı
Bir daha asla bir menünün veya bir ayarın bize ne söylemeye çalıştığını tahmin etmenize gerek yok! Çünkü LR-X serisi, her şeyi eksiksiz bir açıklıkla anlatabilen sezgisel bir OLED ekrana sahiptir. Ayar noktalarından menü ayarlarına kadar bir sensörü anlamak hiç bu kadar kolay olmadı…
Entegre Darbe/Çarpma Alarmı Sektörün İlk Gyro Monitörlü Sensörü
LR-X serisi hedefleri ışık yoğunluğuna göre değil konuma göre algılar. Bu özellik; renk, yüzey kalitesi veya şekilden bağımsız olarak hedeflerin kararlı bir şekilde algılanmasını sağlar. LR-X serisi ufak pozisyon değişiklikleri de dahil olmak üzere çok çeşitli uygulamalarda kullanılabilmektedir.
Teknik Özellikler
- LR-X50
- LR-X100
- LR-X250
- LR-X50C
- LR-X100C
- LR-X250C
- LR-X50CG
- LR-X100CG
- LR-X250CG
- LR-XH50
- LR-XH100
- LR-XH250
- LR-XH50(10M)
- LR-XH100(10M)
- LR-XH250(10M)
- LR-XN11N
- LR-XN12N
- LR-XN11P
- LR-XN12P
- LR-XN11C
- LR-XN10
LR-X50
| Type | Cable Type | |||
| Model | LR-X50 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 0.1 mm 0.004″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 16000 lux or less Sunlight: 16000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X100
| Type | Cable Type | |||
| Model | LR-X100 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 0.1 mm 0.004″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 16000 lux or less Sunlight: 16000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X250
| Type | Cable Type | |||
| Model | LR-X250 | |||
| Detecting Distance | 30 to 250 mm 1.18″ to 9.84″ | |||
| Standard Detectable Deviation | 30 to 180 mm: 9 mm 1.18″ to 7.09″: 0.35″ 180 to 250 mm: 18 mm 7.09″ to 9.84″: 0.71″ |
|||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X50C
| Type | M8 Connector Type*1 | |||
| Model | LR-X50C | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X100C
| Type | M8 Connector Type*1 | |||
| Model | LR-X100C | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X250C
| Type | M8 Connector Type*1 | |||
| Model | LR-X250C | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X50CG
| Type | M8 Connector Type*1 | |||
| Model | LR-X50CG | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X100CG
| Type | M8 Connector Type*1 | |||
| Model | LR-X100CG | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-X250CG
| Type | M8 Connector Type*1 | |||
| Model | LR-X250CG | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH50
| Type | M8 Connector Type*1 | |||
| Model | LR-XH50 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH100
| Type | M8 Connector Type*1 | |||
| Model | LR-XH100 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH250
| Type | M8 Connector Type*1 | |||
| Model | LR-XH250 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH50(10M)
| Type | M8 Connector Type*1 | |||
| Model | LR-XH50(10m) | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH100(10M)
| Type | M8 Connector Type*1 | |||
| Model | LR-XH100(10m) | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XH250(10M)
| Type | M8 Connector Type*1 | |||
| Model | LR-XH250(10m) | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN11N
| Type | M8 Connector Type*1 | |||
| Model | LR-XN11N | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN12N
| Type | M8 Connector Type*1 | |||
| Model | LR-XN12N | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN11P
| Type | M8 Connector Type*1 | |||
| Model | LR-XN11P | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN12P
| Type | M8 Connector Type*1 | |||
| Model | LR-XN12P | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN11C
| Type | M8 Connector Type*1 | |||
| Model | LR-XN11C | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
LR-XN10
| Type | M8 Connector Type*1 | |||
| Model | LR-XN10 | |||
| Detecting Distance | 25.0 to 50.0 mm 0.98″ to 1.97″ | |||
| Standard Detectable Deviation | 0.5 mm 0.02″ | |||
| Display Resolution | 1 to 2 mm 0.04″ to 0.08″ | |||
| Spot Size | Approx. 0.2 mm × 1.5 mm 0.008″ × 0.06″ (at a detecting distance of 50 mm 1.97″) |
|||
| Response Time | 500 µs*1/1 ms/3 ms/10 ms/200 ms Selectable | |||
| light source | ||||
| Type | Green laser (505 nm) | |||
| Laser Class | Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*2) | |||
| IO-Link | Specification v1.1/COM2 (38.4 kbps) | |||
| Functions | ||||
| Timer Function | Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot | |||
| I/O | Control Output | 0.3 μm NPN open collector/PNP open collector, N.O./N.C selectable. *3 30 VDC or lower, 50 mA or lower, Residual voltage 2 V or lower |
||
| External Input | 0.3 μm External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable *3 Short circuit current – NPN: 1 mA or lower, PNP: 2 mA or lower Input time 3 ms or more ON, 20 ms or more OFF (25 ms or more ON, 25 ms or more OFF when External Set is selected only) |
|||
| Protection Circuit | Protection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connection |
|||
| Power supply | ||||
| Power voltage | 16 to 30 VDC (including 10% ripple (P-P) or less), class 2 | |||
| Power consumption | During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current) ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current) |
|||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) | ||
| Ambient light | Incandescent lamp: 8000 lux or less Sunlight: 8000 lux or less |
|||
| Ambient temperature | -10°C to +50°C 14°F to + 122°F (no freezing) | |||
| Relative humidity | 35 to 85% RH (no condensation) | |||
| Vibration resistance | 10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes | |||
| Shock resistance | 1000 m/s2 (100G) 6 times each for X, Y, and Z axes | |||
| Material | Head Case: SUS316L; Head Lens Cover: PSU Head Gasket: FKM (lens cover), EVM (cable) Cable: PVC Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM |
|||
| Accessories | Instruction manual, laser warning label | |||
| Weight | Approx. 90 g 2.20 lb | |||
*1 Classification performed based on IEC60825-1 in accordance with FDA (CDRH) Laser Notice No. 56.
*2 Do not view the beam directly using optical instruments (such as eye loupes, magnifiers, microscopes, telescopes, or binoculars). Observing the laser output using optical instruments is dangerous and may damage the eyes.
*3 Values measured by averaging 4096 times at the reference distance.
*4 The measured target is a KEYENCE standard target. Value when the average height of the default setting area is measured with height and position tools. All other settings are default values.
*5 The measured target is a pin gauge. Value when the point of intersection for the pin gauge rounded surface and edge level is measured using height and position tools. All other settings are default values.
*6 The measured target is a KEYENCE standard target. Profile data when measured by smoothing 64 times and averaging 8 times. All other settings are default values. Values inside parentheses are representative examples of averages for all profile data.
*7 The profile data interval can be changed. If changed, the measurement range in the X direction will also change.
*8 A characteristic that allows for stable, high-precision measurement with a single capture (exposure) at all levels of reflectance, from black (low) to glossy surfaces (high).
*9 The value when a head cable (CB-B*) or extension cable (CB-B*E) is connected. Does not include CB-B**L connection.
*10 When measuring white paper, illuminance on the sensor head receiving surface when light is applied to white paper.
*11 The head needs to be mounted to a metal plate to be used.
*12 When range is extended.