Model

LJ-G080

Installation

Diffuse reflection

Reference distance

80 mm

Measurement range

Z axis (height)

± 23 mm

X axis (width)

Near side

25 mm

Reference distance

32 mm

Far side

39 mm

light source

type

Red semiconductor laser

wavelength

655 nm (visible light) Class 2 laser product (JIS C6802)

output

0.95 mW

Laser class

Class II Laser Product (FDA (CDRH) 21CFR PART1040.10), Class 2 Laser Product (IEC 60825-1)

Spot shape (reference distance)

Approximately 80 µm x 46 mm

Repeat accuracy

Z axis (height)

1 µm ^{* 1 * 2}

X axis (width)

10 µm ^{* 1 * 3}

Straightness

Z axis (height)

± 0.1% of FS ^{* 2}

Sampling cycle (trigger interval)

3.8 ms ^{* 4}

Temperature characteristics

0.02% of FS / ℃

Environmental resistance

Protective structure

IP67 (IEC60529)

Ambient illuminance used

Incandescent lamp / fluorescent lamp: 5,000 lux or less ^{* 5}

Operating ambient temperature

0 to + 50 ° C

Operating ambient humidity

35-85% RH (no condensation)

Vibration resistant

10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction

Material

Aluminum

mass

About 350 g

Model

LJ-G5001P

Head compatibility

Yes

Number of heads connected

MAX 2 units

display

Minimum display unit

0.1 µm ^{* 1} , 0.001 mm ² , 0.01 °

Maximum display range

± 99999.9 mm, ± 999999 mm ² , ± 99999.9 °

Input terminal block

Laser remote interlock input

No voltage input ^{* 2}

Trigger input

Voltage input for head A ^{* 2}

Timing 1 input

Voltage input ^{* 2}

Auto zero 1 input

Reset input

Output terminal block

Analog voltage output

± 10V x 2 output, output impedance 100Ω ^{* 2}

Comprehensive judgment output

PNP open collector output ^{* 2}

Error output

PNP open collector output (NC) ^{* 2}

Processing output

PNP open collector output ^{* 2}

Trigger input permission output

PNP open collector output for head A ^{* 2}

Correction error output

Expansion connector

Timing 2 input

Voltage input ^{* 2}

Auto zero 2 input

Trigger input

Voltage input for head B ^{* 2}

Program switching input

Voltage input x 4 inputs ^{* 2}

Memory card save input

Voltage input ^{* 2}

Laser off input

Voltage input for head A / head B ^{* 2}

Judgment / binary output

3-step judgment output: OUT1 to OUT8, comprehensive judgment output, binary output: OUT1 to OUT8, measurement data output (21bit), PNP open collector output ^{* 3 * 2}

Strobe output

PNP open collector output ^{* 2}

Trigger input permission output

PNP open collector output for head B ^{* 2}

Correction error output

Analog RGB monitor output

SVGA (800 x 600 pixels)

RS-232C interface

Measurement data output and control input / output (baud rate can be selected up to 115200 bit / s)

USB interface

USB2.0 HI-SPEED compatible (USB1.1 Full-SPEED compatible)

Ethernet interface

100BASE-TX / 10BASE-T

Memory card

Compatible with NR-M1G (1GB) (FAT32)

Main functions

Head-to-head calculation function, profile adjustment function, filter function, smoothing function, averaging function, position correction function, OUT name change function, measurement mode selection (height / position / step / width / center position / cross-sectional area / intersection / angle -Profile comparison / profile tracking) function, scaling function, average function, measurement function, measured value alarm setting function, tolerance setting function, auto zero function, storage (data profile) function, memory card save function, program memory function, trigger mode Change function, mutual interference prevention function, measurement range variable function, tuning setting function, laser light amount adjustment function, sampling time setting function, mask function, profile alarm setting function, tilt correction function, height correction function, display language switching function, setting Support software connection function, trigger interval / measurement time display function, etc.

Rated

Power-supply voltage

DC 24 V ± 10%, Ripple (PP) 10% or less

Maximum current consumption

800mA or less when one head is connected / 1A or less when two heads are connected

Environmental resistance

Operating ambient temperature

0 to + 50 ° C

Operating ambient humidity

35-85% RH (no condensation)

mass

Approximately 1,050 g