KEYENCE ES Ayarlanabilir Mesafeli Endüktif Sensör - Entek Otomasyon

AnasayfaTeknolojilerEndüstriyel Sensörler ve Makine EmniyetiYaklaşım SensörleriKEYENCE ES Ayarlanabilir Mesafeli Endüktif Sensör

KEYENCE ES ile Algılama Mesafesi ve Hassasiyeti Siz Belirleyin

KEYENCE ES Standart sensörlerin aksine yüksek tekrarlanabilirlik ve düşük histeresis ile algılama sağlar.

Özellikler

Yüksek tekrarlanabilirlik ve düşük histerezis
Algılama mesafesi ayarı
Yüksek hızda ve doğrulukta algılama için ayrı yükseltici ünite
70 mm’ye kadar algılama mesafesine sahip 20’den fazla sensör alternatifi
Alarm uyarı bilgi çıkışı
Darbelere karşı zırhlı korumalı sensörler
Yağlı ortamlar için IP67 koruma sınıfına sahip sensörler

Dokümanlar

Keyence ES Ayarlanabilir Mesafeli Endüktif Sensör

1 file(s) 513.69 KB

Login is required to access this page

Teknik Özellikler

ES-32DC
ES-M1
ES-M1P
ES-M2P
ES-X38

ES-32DC

Model				ES-32DC
type				DC type
Operation mode				NO / NC switch switching
indicator				Output: Red LED
output	Control output			NPN open collector maximum 200mA (40V or less) Residual voltage 1V or less
	Disconnection alarm output			NPN open collector maximum 100mA (40V or less) Residual voltage 1V or less
Leakage current (off time)				―
Response time				1ms or less
Temperature characteristics				± 8% or less of the detection distance at + 23 ° C in the temperature range of 0 to + 50 ° C
Sensitivity adjustment				15-turn trimmer
Rated	Power-supply voltage			DC 10-28 V, Ripple (PP) 10% or less
	Current consumption (power)			18mA or less
Environmental resistance	Operating ambient temperature			0 to + 50 ° C
	Operating ambient humidity			35-85% RH (no condensation)
mass				About 48 g

ES-M1

Model				ES-M1 ^{* 1}
type				DC type (one-line wiring saving compatible)
shape				Master unit
Operation mode				NO / NC switch switching
Indicator light				Output display: Red Disconnection alarm display: Yellow
Timer function				Delay 10ms / Timer OFF ^{* 2}
Output type				NPN output
output	Control output			NPN open collector Maximum 100mA 40V or less Residual voltage 1V or less
	Disconnection alarm output			NPN open collector Maximum 100mA 40V or less Residual voltage 1V or less ^{* 3}
Response time				1ms or less
Temperature characteristics				± 8% or less of the detection distance at + 23 ° C in the temperature range of 0 to + 50 ° C
Sensitivity adjustment				25 rotation trimmer
Protection circuit				Power supply reverse connection protection, output overcurrent protection, surge absorption
Rated	Power-supply voltage			DC 12-24 V, Ripple (PP) 10% or less
	Current consumption (power)			25mA or less
Environmental resistance	Operating ambient temperature			0 to + 50 ℃ ^{* 4}
	Operating ambient humidity			35-85% RH (no condensation)
mass				Approximately 65 g (with cord 2 m)
^{* 1} ES -M1 (P) / M2 (P) cannot be connected to EH-422 / 430/440/290. ^{* 2} Operation mode NO off delay 10ms, NC on delay 10ms. ^{* 3} ES-M2 (P) does not have a disconnection alarm output. ^{* 4 When} adding, the ambient temperature will change depending on the following conditions. When adding, be sure to attach it to the DIN rail (metal plate) and set the output current to 20mA or less . 1 to +10 units added 0 to +50 ° C 11 to +16 units added 0 to +45 ° C

ES-M1P

Model				ES-M1P ^{* 1}
type				DC type (one-line wiring saving compatible)
shape				Master unit
Operation mode				NO / NC switch switching
Indicator light				Output display: Red Disconnection alarm display: Yellow
Timer function				Delay 10ms / Timer OFF ^{* 2}
Output type				PNP output
output	Control output			PNP open collector Maximum 100mA 26.4V or less Residual voltage 1V or less
	Disconnection alarm output			PNP open collector Maximum 100mA 26.4V or less Residual voltage 1V or less ^{* 3}
Response time				1ms or less
Temperature characteristics				± 8% or less of the detection distance at + 23 ° C in the temperature range of 0 to + 50 ° C
Sensitivity adjustment				25 rotation trimmer
Protection circuit				Power supply reverse connection protection, output overcurrent protection, surge absorption
Rated	Power-supply voltage			DC 12-24 V, Ripple (PP) 10% or less
	Current consumption (power)			25mA or less
Environmental resistance	Operating ambient temperature			0 to + 50 ℃ ^{* 4}
	Operating ambient humidity			35-85% RH (no condensation)
mass				Approximately 65 g (with cord 2 m)
^{* 1} ES -M1 (P) / M2 (P) cannot be connected to EH-422 / 430/440/290. ^{* 2} Operation mode NO off delay 10ms, NC on delay 10ms. ^{* 3} ES-M2 (P) does not have a disconnection alarm output. ^{* 4 When} adding, the ambient temperature will change depending on the following conditions. When adding, be sure to attach it to the DIN rail (metal plate) and set the output current to 20mA or less . 1 to +10 units added 0 to +50 ° C 11 to +16 units added 0 to +45 ° C

ES-M2P

Model				ES-M2P ^{* 1}
type				DC type (one-line wiring saving compatible)
shape				Cordless handset
Operation mode				NO / NC switch switching
Indicator light				Output display: Red Disconnection alarm display: Yellow
Timer function				Delay 10ms / Timer OFF ^{* 2}
Output type				PNP output
output	Control output			PNP open collector Maximum 100mA 26.4V or less Residual voltage 1V or less
	Disconnection alarm output			― ^{* 3}
Response time				1ms or less
Temperature characteristics				± 8% or less of the detection distance at + 23 ° C in the temperature range of 0 to + 50 ° C
Sensitivity adjustment				25 rotation trimmer
Protection circuit				Power supply reverse connection protection, output overcurrent protection, surge absorption
Rated	Power-supply voltage			DC 12-24 V, Ripple (PP) 10% or less
	Current consumption (power)			25mA or less
Environmental resistance	Operating ambient temperature			0 to + 50 ℃ ^{* 4}
	Operating ambient humidity			35-85% RH (no condensation)
mass				Approximately 35 g (with cord 2 m)
^{* 1} ES -M1 (P) / M2 (P) cannot be connected to EH-422 / 430/440/290. ^{* 2} Operation mode NO off delay 10ms, NC on delay 10ms. ^{* 3} ES-M2 (P) does not have a disconnection alarm output. ^{* 4 When} adding, the ambient temperature will change depending on the following conditions. When adding, be sure to attach it to the DIN rail (metal plate) and set the output current to 20mA or less . 1 to +10 units added 0 to +50 ° C 11 to +16 units added 0 to +45 ° C

ES-X38

Model				ES-X38
type				DC type
Operation mode				NO / NC switch switching
indicator				Output: Red LED
output	Control output			NPN open collector maximum 100mA (40V or less) Residual voltage 1V or less
	Disconnection alarm output			NPN open collector maximum 100mA (40V or less) Residual voltage 1V or less
Leakage current (off time)				―
Response time				1ms or less
Temperature characteristics				± 8% or less of the detection distance at + 23 ° C in the temperature range of 0 to + 50 ° C
Sensitivity adjustment				15-turn trimmer
Rated	Power-supply voltage			DC 12-24 V, Ripple (PP) 10% or less
	Current consumption (power)			25mA or less
Environmental resistance	Operating ambient temperature			0 to + 50 ° C
	Operating ambient humidity			35-85% RH (no condensation)
mass				Approximately 67 g (with code 2 m)