AnasayfaTeknolojilerEndüstriyel Sensörler ve Makine EmniyetiYaklaşım SensörleriKEYENCE EM Minyatür Endüktif Sensörler

KEYENCE EM Minyatür Endüktif Sensörler

Keyence EM serisi endüktif sensörler ile alan kısıtlaması olan dar makine ortamlarında yüksek performanslı ve kararlı çözümler sunar. Özel tasarımı sayesinde dahili indikatör ve algılayıcı devreyi ultra küçük ve kısa boyutlarda birleştiren bu minyatür seri, kompakt gövdesine rağmen uzun mesafelerden bile üstün bir algılama performansı sağlar. IP67 koruma sınıfı sayesinde zorlu koşullara dayanıklı olan yapısıyla en dar alanlara bile pratik bir şekilde monte edilerek mühendislere kurulum esnekliği sağlarken, hassas metal algılama gerektiren birçok endüstriyel otomasyon uygulamasında güvenle kullanılabilir.

Özellikler

  • Ultra küçük ve kısa sensör boyutları
  • IP67 koruma sınıfı
  • Dahili indikatörün ve algılayıcı devrenin, özel bir tasarım ile, sensörün oldukça küçük boyutlarda olması sağlandı.
  • Küçük boyutlarda olmasına rağmen, uzun mesafelerden kararlı algılama sağlamaktadır.
KEYENCE EM Minyatür Endüktif Sensörler
Teknik Özellikler
Dokümanlar

Dokümanlar

Keyence EM Genel Katalog

Keyence EM Kullanım Kılavuzu

Teknik Özellikler

Model EM-005
type Shield type (can be embedded in metal)
shape M5 screw type
Detection distance 1.0 mm ± 15%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 5 x 5 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type NPN output
Control output NPN open collector Maximum 200mA (40V or less) Residual voltage 1V or less
Head case material SUS303
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 12 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 40 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.

specification

Model EM-005P
type Shield type (can be embedded in metal)
shape M5 screw type
Detection distance 1.0 mm ± 15%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 5 x 5 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type PNP output
Control output PNP open collector Maximum 200mA (30V or less) Residual voltage 1V or less
Head case material SUS303
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 20 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 40 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.

specification

Model EM-010P
type Shield type (can be embedded in metal)
shape M10 screw type
Detection distance 2.0 mm ± 10%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 10 x 10 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type PNP output
Control output PNP open collector Maximum 200mA (30V or less) Residual voltage 1V or less
Head case material Brass chrome plating
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 20 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 50 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.

specification

Model EM-014
type Shield type (can be embedded in metal)
shape M14 screw type
Detection distance 4.0 mm ± 10%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 15 x 15 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type NPN output
Control output NPN open collector Maximum 200mA (40V or less) Residual voltage 1V or less
Head case material Brass chrome plating
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 12 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 60 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.
Model AP-C30W
type Multi range
Rated pressure range Negative pressure: 0 to -101.3 kPa Positive
pressure: 0 to 100.0 kPa
Combined pressure : 101.3 to -101.3 kPa
Adaptive fluid Air / non-corrosive gas
Type of pressure Gauge pressure
Display method 3 + 1/2 digit 2 color 7-segment LED display (character height 11 mm), display cycle: 10 times / sec
Operation indicator Red LED x 2 (corresponds to control output 1 / control output 2)
power consumption Normal At 12 V: 720 mW (60 mA) or less, at 24 V: 960 mW (40 mA) or less
Display resolution Multirange: Negative pressure / Positive pressure 0.1 kPa, Combined pressure 0.2 kPa
Display temperature characteristics ± 1% of FS or less
Hysteresis Variable (standard 0.5% of FS) * 1
Response time (chattering prevention function) 2.5 / 5/100/500 ms selection
Input / output Analog output 1-5 V, output impedance 1 kΩ or less (switching with zero shift input)
Zero shift input No-voltage input (no contact), input time 2 ms or more (switching to analog output)
Control output NPN open collector, maximum 100 mA (40 V or less), residual voltage 1 V or less, 2 outputs (NO / NC switchable)
Pressure port Rc (PT) 1/8, 180 degree rotation
Rated Power-supply voltage DC 12-24 V ± 10%, Ripple (PP) 10% or less
power consumption Eco-mode At 12 V: 480 mW (40 mA) or less, at 24 V: 720 mW (30 mA) or less
Environmental resistance Pressure resistance 500 kPa
Operating ambient temperature 0 to + 50 ° C (do not freeze)
Operating ambient humidity 35-85% RH (no condensation)
Vibration resistant 10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material Front case: Polysulfone, Rear case: PBT, Front seat: Polycarbonate, Pressure port: Zinc die casting
accessories Power cable (2 m, connector connection type), unit seal
mass 30 g (excluding cable) / 78 g (with cable 2 m)
* 1 Standard 0.2% of FS at focus
Model EM-038
type Shield type (can be embedded in metal)
shape ø3.8 Cylindrical
Detection distance 0.8 mm ± 15%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 5 x 5 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type NPN output
Control output NPN open collector Maximum 200mA (40V or less) Residual voltage 1V or less
Head case material SUS303
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 12 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 38 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.

specification

Model EM-038P
type Shield type (can be embedded in metal)
shape ø3.8 Cylindrical
Detection distance 0.8 mm ± 15%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 5 x 5 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type PNP output
Control output PNP open collector Maximum 200mA (30V or less) Residual voltage 1V or less
Head case material SUS303
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 20 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 38 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.
Model EM-054
type Shield type (can be embedded in metal)
shape ø5.4 Cylindrical
Detection distance 1.2 mm ± 10%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 6 x 6 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type NPN output
Control output NPN open collector Maximum 200mA (40V or less) Residual voltage 1V or less
Head case material SUS304
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 12 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 40 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.
Model EM-054P
type Shield type (can be embedded in metal)
shape ø5.4 Cylindrical
Detection distance 1.2 mm ± 10%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 6 x 6 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type PNP output
Control output PNP open collector Maximum 200mA (30V or less) Residual voltage 1V or less
Head case material SUS304
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 20 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 40 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.
Model EM-080
type Shield type (can be embedded in metal)
shape ø8 Cylindrical
Detection distance 2.0 mm ± 10%
Detected object Magnetic metal (Refer to the characteristic diagram for non-magnetic metal)
Standard detection object (iron t = 1 mm) 10 x 10 mm
Spacing distance 10% or less of the detection distance
Response frequency 1.2kHz
Operation mode NO
Temperature characteristics ± 10% or less of the detection distance at + 23 ° C (-10 to + 70 ° C)
Output display Red LED
Output type NPN output
Control output NPN open collector Maximum 200mA (40V or less) Residual voltage 1V or less
Head case material SUS304
Rated Power-supply voltage DC 10.8-30 V, Ripple (PP) 10% or less * 1
Current consumption 12 mA or less
Environmental resistance Protective structure IP67
Operating ambient temperature -25 to + 80 ° C (do not freeze)
Operating ambient humidity 35-95% RH
accessories Nut x 2 (screw type only), toothed washer x 1 (screw type only), amplifier fixing bracket x 1
mass Approximately 42 g (with nut cord 2 m)
* 1 Make sure that the voltage does not fall outside the range of 10.8-30 V due to ripple.

Webinar: Yapay Zeka ile Desteklenen, Poke-Yoke Uygulamaları İzleme Formu

Robotik Webinar

Webinar: Robotik sistemlerde kamera desteği ile nasıl fark yaratırız?

Webinar: Robotlarla üretim verimliliğinizi ve esnekliğinizi nasıl artırırsınız?

Webinar: Sensörler gelişen performanslarıyla büyülüyor