AnasayfaTeknolojilerEndüstriyel Sensörler ve Makine EmniyetiMakine Emniyet ÜrünleriEmniyet Işık PerdesiKEYENCE SL-V İnce Gövdeli Işık Perdeleri
KEYENCE SL-V İnce Gövdeli Işık Perdesi

KEYENCE SL-V İnce gövdeli ve yüksek görünürlüklü ışık perdesi

KEYENCE SL-V İnce gövdeli ışık perdesi
Teknik Özellikler
Dokümanlar
Avantajlar

Tümüyle görüş netliğine odaklanmış güvenlik ışık perdesi.

Kontrollü geçiş (muting), sabit ve hareketli alan kapatma gibi güvenlik ihtiyaçlarına cevap verebilen yazılım desteği.

Özellikler
  • Yüksek görünürlüğe sahip çalışma durumu bilgisi içeren indikatörler
  • Ölü bölgesiz, kenardan kenara algılama
  • Durum bilgisi ve durum bilgi çıkışı
  • Sağlam, su geçirmez model (IP67 koruma sınıfı)
  • Dahili ve üst düzey güvenlik fonksiyonları 

Dokümanlar

Keyence SL-V İnce Gövdeli Işık Perdesi

Teknik özellikler

Model SL-V12H
Minimum detector ø 25 mm
full length 230 mm
Number of optical axes 12
Detection height 220 mm
Protective height 265 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 7.6 * 1
OFF → ON 47.6 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 63 * 6
Receiver 72 * 6
When the center indicator is
off		 Floodlight 58 * 6
Receiver 66 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 200 g
Receiver 205 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V16H
Minimum detector ø 25 mm
full length 310 mm
Number of optical axes 16
Detection height 300 mm
Protective height 345 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 8.1 * 1
OFF → ON 48.1 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 69 * 6
Receiver 74 * 6
When the center indicator is
off		 Floodlight 64 * 6
Receiver 67 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 250 g
Receiver 265 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V23F
Minimum detector ø 14 mm
full length 230 mm
Number of optical axes twenty three
Detection height 220 mm
Protective height 244 mm
Optical axis pitch / lens diameter 10 mm / ø4 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-7 m
Response time (ms) ON → OFF 9.1 * 1
OFF → ON 49.1 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 83 * 6
Receiver 78 * 6
When the center indicator is
off		 Floodlight 80 * 6
Receiver 74 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 200 g
Receiver 205 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V24H
Minimum detector ø 25 mm
full length 470 mm
Number of optical axes twenty four
Detection height 460 mm
Protective height 505 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 9.2 * 1
OFF → ON 49.2 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 81 * 6
Receiver 77 * 6
When the center indicator is
off		 Floodlight 76 * 6
Receiver 69 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 350 g
Receiver 365 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V31F
Minimum detector ø 14 mm
full length 310 mm
Number of optical axes 31
Detection height 300 mm
Protective height 324 mm
Optical axis pitch / lens diameter 10 mm / ø4 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-7 m
Response time (ms) ON → OFF 10.2 * 1
OFF → ON 50.2 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 93 * 6
Receiver 80 * 6
When the center indicator is
off		 Floodlight 90 * 6
Receiver 75 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 270 g
Receiver 275 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V40H
Minimum detector ø 25 mm
full length 790 mm
Number of optical axes 40
Detection height 780 mm
Protective height 825 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 11.4 * 1
OFF → ON 51.4 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 103 * 6
Receiver 84 * 6
When the center indicator is
off		 Floodlight 96 * 6
Receiver 72 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 550 g
Receiver 575 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V52H
Minimum detector ø 25 mm
full length 1,030 mm
Number of optical axes 52
Detection height 1,020 mm
Protective height 1,065 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 13.1 * 1
OFF → ON 53.1 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 117 * 6
Receiver 88 * 6
When the center indicator is
off		 Floodlight 109 * 6
Receiver 74 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 700 g
Receiver 725 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON
Model SL-V64H
Minimum detector ø 25 mm
full length 1,270 mm
Number of optical axes 64
Detection height 1,260 mm
Protective height 1,305 mm
Optical axis pitch / lens diameter 20 mm / ø5 mm
Effective opening angle Maximum ± 2.5 ° (when the detection distance is 3 m or more)
Detection distance 0.1-9 m
Response time (ms) ON → OFF 14.7 * 1
OFF → ON 54.7 * 1
light source Infrared LED (850 nm)
Operation mode ON when all optical axes are illuminated
OSSD output Output type Switchable with 2 output connector cables each for PNP / NPN
Maximum load current 500mA * 2
Residual voltage (when ON) Up to 2.5 V (at 7 m cable)
Leak current Maximum 100 µA * 3
Maximum load capacity 2.2 µF (when load resistance is 100 Ω)
Load wiring resistance Maximum 2.5 Ω * 4
Output for non-safety circuit AUX With PNP / NPN automatic switching function, maximum output 50 mA
Output waiting for interlock release
Alarm output
Ingress / flash output
State output 1, 2
Muting lamp output Incandescent (DC 24 V, 1 ~ 7 W), LED lamp (load current ~ 300 mA 10) * 5 connectable
input EDM input Short circuit current 10 mA
Standby input Short circuit current 2.5 mA
Reset input
Muting inputs 1, 2
Override input
Protection circuit Power reverse connection protection, each output short circuit protection, each output surge protection
Conformity standard EMC EMS IEC61496-1, EN61496-1, UL61496-1, IEC62061
EMI EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
safety IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, UL61496-2, EN61496-2 (Type 4 AOPD)
IEC61508 (SIL3), EN61508 (SIL3), IEC62061 (SIL3),
EN ISO13849- 1: 2015 (category 4, PLe)
UL508
UL1998
Rated Power-supply voltage DC 24 V + 10%, -20%, Ripple (PP) 10% or less
Current consumption (mA) When the center indicator lights
up		 Floodlight 130 * 6
Receiver 93 * 6
When the center indicator is
off		 Floodlight 120 * 6
Receiver 77 * 6
Environmental resistance Protective structure IP65 (IEC60529)
Overvoltage category II
Ambient illuminance used Incandescent lamp: 5,000 lux or less, sunlight: 20,000 lux or less
Operating ambient temperature -10 to + 55 ° C (do not freeze)
Storage ambient temperature -25 to + 60 ° C (do not freeze)
Operating ambient humidity 15-85% RH (no condensation)
Storage ambient humidity 15-95% RH
Vibration resistant 10-55 Hz, double amplitude 0.7 mm, X, Y, Z 20 sweeps in each direction
Impact resistance 100 m / s 2 (about 10 G), 16 ms pulse, X, Y, Z 1,000 times in each direction
Material Body case aluminum
Upper case / lower case Zinc die cast
front cover Polycarbonate, SUS304
mass Floodlight 860 g
Receiver 885 g
* 1 If the flashing time is 80 ms or less, the response time (OFF → ON) will be slowed down to a minimum of 80 ms to ensure that the OSSD keeps OFF for 80 ms or more.
* 2 When used at an ambient temperature of 45 to 55 ° C, the temperature will be 300 mA or less.
* 3 Includes the state where the power is off or the power line is broken.
* 4 For proper operation, the wiring resistance between the OSSD output and the device to be connected (excluding the wiring resistance of the optional dedicated cable) should be 2.5 Ω or less.
If the NPN output is used, the cable length is 15 m or more, and the load current is 200 mA or more, set it to 1.0 Ω or less.
* 5 When used at an ambient temperature of 45 to 55 ° C, incandescent lamps (DC 24 V, 1 to 3 W) and LED lamps (load current 10 to 100 mA) are used.
* 6 When the AUX output (red line of the floodlight) and the EDM input (red line of the receiver) are short-circuited and the following conditions are met, the current consumption of the floodlight increases by 10 mA from the above, and the receiver’s current consumption increases. Current consumption is reduced by 10 mA. (The total current consumption of the floodlight and receiver does not change.)
-When OSSD is OFF when using a PNP output cable-OSSD when using an NPN output cable When is ON

Webinar: Yapay Zeka ile Desteklenen, Poke-Yoke Uygulamaları İzleme Formu

Robotik Webinar

Webinar: Robotik sistemlerde kamera desteği ile nasıl fark yaratırız?

Webinar: Robotlarla üretim verimliliğinizi ve esnekliğinizi nasıl artırırsınız?

Webinar: Sensörler gelişen performanslarıyla büyülüyor