KEYENCE SR-1000 Kod Okuyucu

KEYENCE SR-1000 Barkod Okuyucular

Bilgisayarsız tam otomatik ayarlama/kontrol
Otofokus-geniş alan, otomatik parametreler, otomatik polarizasyon kontrolü
Değişen ortam koşullarından etkilenmeyi engelleyen akıllı mod

Bilgisayarsız tam otomatik ayarlama / Tam otomatik tuning

Kod okuyucu pozlama süresini, görüntü işleme filtresini ve diğer parametreleri hedefe ve mesafeye göre otomatik olarak optimize eder.
Otomatik odak ayarlama, 1000 mm’ye kadar esnek kurulum

Kod okuyucunun performans ve özellikleri, geniş kurulum olanakları ile üretim hatları için makine tasarım esnekliğini sunar
Kod okuyucu pozlama süresini, görüntü işleme filtresini ve diğer parametreleri hedefe ve mesafeye göre otomatik olarak optimize eder.

Otomatik Polarizasyon Kontrolü

Montaj esnekliği sağlar. Kod okuyucu parlamayı otomatik olarak yok eder ve montajda açı ayarlaması ya da harici ışık kullanımı ihtiyacını ortadan kaldırır. Oto fokus fonksiyonu ile birleştirildiğinde yüksek montaj esnekliği sağlar.

Görüntü Yakalama, Parlaklık Düzeltme

Optimum görüntüyü yakalamak için çeşitli pozlama süresi, dinamik parlaklık ve kazanç kombinasyonlarını otomatik
olarak yapılandırır.

Karşıklık Düzeyini Düzeltme

Siyah/beyaz eşiğini otomatik olarak düzeltir ve kod ve arkaplan arasındaki kontrastı optimize eder.

Filtre Düzeltme

Yakalanan görüntüyü otomatik seçer.

Geometrik Düzeltme

Silindir ya da yuvarlak yüzeyler üzerinde bulunan ya da okuyucunun açılı yerleştirilmesi durumunda
oluşan bozuk kodları düzeltir.

Görüntü Küçültme & Düzeltme

Görüntü boyutunu düşürmek arka plandaki parazit ya da eksik alanları azaltabilir. Arka planda bulunan parazit,
leke ya da çiziklerden kaynaklanan kusurlar görüntü boyutu düşürüldükten sonra azalır.

Yüksek Seviye Kodlama

Lokal Yoğunlaşması için Kontrast Algoritması

Lokal yoğunlaşma algoritmamız her bölüm için belirlenmiş sınırları kullanarak kodu küçük parçalara böler. Bu da eşit olmayan baskı yoğunluğundan etkilenmeden siyah/beyaz sınıflandırması yapabilmesini sağlar.

CPC (Compound Parabolic) Aydınlatma

Özel biçimli reflektör, yüksek şiddetli LED’lerin ışık şiddetindeki kayıtları azaltarak yüksek verimli aydınlatma sağlamak için tasarlandı. Altın kaplama, yansıma oranını en üst düzeye çıkararak parlaklığı %400′ ün üzerinde arttırır. Bu sayede parlak, tek tip aydınlatmalı, uzun mesafelerde bile okuma sağlar.

Değişen Ortam Koşullarından Etkilenmez

AKILLI MOD

Kod Koşullarından Bağımsız Tutarlı Okuma İçin

Kod koşullarındaki dalgalanmalar ayarlama sırasında öngörülerek genişletilmiş okuma ayarları otomatik olarak oluşturulur. Bu sayede kod kontrastı değiştiğinde bile kod okuyucuyu yeniden ayarlama gerekmeksizin tutarlı okuma sağlar.

Kod Koşullarındaki Değişimleri Algılama İçin Özel Mod

Kod Kalite Yönetimi İçin

SR-1000 kod kalitesi üzerinde tahmin yapma fonksiyonuna sahiptir. Kod kalitesindeki bozulma okuma hataları oluşmadan önce algılanabileceği için, bu mod baskı işlemi için ön bakım olarak kullanılabilir.

C PROGRAMLAMA DİLİ İLE ÖLÇÜM MODU

Dokümanlar

Keyence SR-1000 – Barkod Okuyucu

Teknik özellikler

SR-1000

Model			SR-1000
type			Standard type
Light receiving section	Sensor		CMOS image sensor
	Number of pixels		1280 x 1024 pixels
	focus		Auto ^{* 1}
Light emitting part	Illumination light source		High brightness red LED
	Pointer light source		High brightness green LED
Reading specifications	Corresponding symbol	2D code	QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A / CC-B / CC-C)
		barcode	CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN / EAN / UPC, Trioptic CODE39 , CODE39 Full ASCII, Pharmacode
	Minimum resolution	2D code	0.063mm
		barcode	0.082mm
	Reading distance		110-1000mm
	Reading field of view		122 x 97 mm ( typical example: when 400 mm)
Input / output specifications	Control input	Score	2 points
		Input format	Bidirectional voltage input
		Maximum rating	DC26.4V
		Minimum ON voltage	DC15V
		Maximum OFF current	0.2mA or less
	Control output	Score	3 points
		Output format	Photo MOS relay output
		Maximum rating	DC30V
		Maximum load current	1 output: 50mA or less, 3 outputs total: 100mA or less
		Leakage current when OFF	0.1mA or less
		Residual voltage when ON	1V or less
	Ethernet	Communication standard	IEEE 802.3 compliant 10BASE-T / 100BASE-TX
		Supported protocols	TCP / IP, SNTP, FTP, BOOTP, MC protocol, OMRON PLC link, KV STUDIO, EtherNet / IP ^TM , PROFINET
	Serial communication	Communication standard	RS-232C compliant
		communication speed	9600, 19200, 38400, 57600, 115200 bps
		Supported protocols	Stepless, MC protocol, SYSWAY, KV STUDIO
	USB	Communication standard	USB 2.0 Full Speed compliant
Rated	Power-supply voltage		DC 24 V ± 10%
	Current consumption		Approximately 700 mA
Environmental resistance	Protective structure		IP65
	Ambient illuminance used		Sunlight: 10,000 lux, incandescent lamp: 6,000 lux, fluorescent lamp: 2,000 lux
	Operating ambient temperature		0 to + 45 ° C
	Storage ambient temperature		-10 to + 50 ° C
	Operating ambient humidity		35-85% RH (no condensation)
	Storage ambient humidity
	Atmosphere		No dust or corrosive gas
	Vibration resistant		10-55 Hz, double amplitude 0.75 mm, X, Y, Z 3 hours in each direction
mass			About 200 g
^{* 1 The} focus position can be adjusted automatically during installation.

SR-1000W

Model			SR-1000W
type			Wide field of view type
Light receiving section	Sensor		CMOS image sensor
	Number of pixels		1280 x 1024 pixels
	focus		Auto ^{* 1}
Light emitting part	Illumination light source		High brightness red LED
	Pointer light source		High brightness green LED
Reading specifications	Corresponding symbol	2D code	QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A / CC-B / CC-C)
		barcode	CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN / EAN / UPC, Trioptic CODE39 , CODE39 Full ASCII, Pharmacode
	Minimum resolution	2D code	0.082mm
		barcode
	Reading distance		50-600mm
	Reading field of view		257 x 206 mm ( typical example: when 400 mm)
Input / output specifications	Control input	Score	2 points
		Input format	Bidirectional voltage input
		Maximum rating	DC26.4V
		Minimum ON voltage	DC15V
		Maximum OFF current	0.2mA or less
	Control output	Score	3 points
		Output format	Photo MOS relay output
		Maximum rating	DC30V
		Maximum load current	1 output: 50mA or less, 3 outputs total: 100mA or less
		Leakage current when OFF	0.1mA or less
		Residual voltage when ON	1V or less
	Ethernet	Communication standard	IEEE 802.3 compliant 10BASE-T / 100BASE-TX
		Supported protocols	TCP / IP, SNTP, FTP, BOOTP, MC protocol, OMRON PLC link, KV STUDIO, EtherNet / IP ^TM , PROFINET
	Serial communication	Communication standard	RS-232C compliant
		communication speed	9600, 19200, 38400, 57600, 115200 bps
		Supported protocols	Stepless, MC protocol, SYSWAY, KV STUDIO
	USB	Communication standard	USB 2.0 Full Speed compliant
Rated	Power-supply voltage		DC 24 V ± 10%
	Current consumption		Approximately 700 mA
Environmental resistance	Protective structure		IP65
	Ambient illuminance used		Sunlight: 10,000 lux, incandescent lamp: 6,000 lux, fluorescent lamp: 2,000 lux
	Operating ambient temperature		0 to + 45 ° C
	Storage ambient temperature		-10 to + 50 ° C
	Operating ambient humidity		35-85% RH (no condensation)
	Storage ambient humidity
	Atmosphere		No dust or corrosive gas
	Vibration resistant		10-55 Hz, double amplitude 0.75 mm, X, Y, Z 3 hours in each direction
mass			About 200 g
^{* 1 The} focus position can be adjusted automatically during installation.

SR-710

Model			SR-710
type			Medium range type
Laser pointer	light source		Visible light semiconductor laser (wavelength 660 nm)
	output		60µW
	pulse width		200µs
	Laser class		Class 1 Laser Products (IEC60825-1, FDA (CDRH) Part 1040.10)
illumination	light source		High brightness red LED
reading	Corresponding code	barcode	CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128 , GS1-128, GS1 DataBar, CODE93, JAN / EAN / UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode
		Two-dimensional code	QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, Micro PDF417, GS1 Composite (CC-A / CC-B / CC-C)
	Minimum resolution	barcode	0.127mm
		Two-dimensional code	0.19mm
	Reading distance (typical example)	barcode	45 to 195 mm (narrow bar width = 0.5 mm)
		Two-dimensional code	45 to 165 mm (cell size = 0.5 mm)
	Focal length		100mm
	Reading field of view (typical example: at focal length)		70mm x 45mm
Input / output	Control input		2 points (IN1, IN2), non-voltage input (contact, non-contact)
	Control output		NPN open collector output 4 points (OUT1-4) Maximum 30mA (24V or less) Residual voltage 0.8V or less, leakage current 0.1mA or less
	RS-232C	communication speed	9600, 19200, 38400, 57600, 115200 bps
		Supported protocols	Stepless, MC protocol, SYSWAY, KV STUDIO
	USB		USB 2.0 Full Speed compliant
Rated	Power-supply voltage		DC 5 V + 5%, -10%
	Current consumption		630 mA or less
Environmental resistance	Protective structure		IP65
	Ambient illuminance used		Sunlight: 10,000 lux, incandescent lamp: 6,000 lux, fluorescent lamp: 2,000 lux
	Operating ambient temperature		0 to + 45 ° C
	Storage ambient temperature		-10 to + 50 ° C (do not freeze)
	Operating ambient humidity		35-95% RH (no condensation)
	Atmosphere		No dust or corrosive gas
	Vibration resistant		10-55 Hz, double amplitude 1.5 mm, X, Y, Z 3 hours in each direction
mass			Approximately 160 g (including cable)

SR-751

Model			SR-751
type			Medium range type
Light receiving section	Sensor		CMOS image sensor
	Number of pixels		752 x 480 pixels
illumination	light source		Red LED
Laser pointer			Visible light semiconductor laser 660nm
	output		60µW
	pulse width		200µs
	Laser class		Class 1 Laser Products (IEC60825-1, FDA (CDRH) Part 1040.10 ^{* 1} )
Reading specifications	Minimum resolution	2D	0.19mm
		barcode	0.127mm
	Corresponding symbol	2D	QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, GS1 Composite (CC-A, CC-B, CC-C)
		barcode	CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN / EAN / UPC, Trioptic CODE39, CODE39 Full ASCII
	Reading distance (typical example)	DataMatrix QR	45-165 mm (cell size = 0.5 mm)
		barcode	45-195mm (narrow bar width = 0.5mm)
	Focal length		100mm
	Reading field of view (focal length)		70mm x 45mm
Input / output specifications	Control input	Score	2 points
		Input format	Bidirectional voltage input
		Maximum rating	DC26.4V
		Minimum ON voltage	DC15V
		Maximum OFF current	0.2mA or less
	Control output	Score	3 points
		Output format	Photo MOS relay output
		Maximum rating	DC30V
		Maximum load current	1 output: 50mA or less, 3 output total: 100mA or less
		Leakage current when OFF	0.1mA or less
		Residual voltage when ON	1V or less
	Ethernet	Communication standard	10BASE-T / 100BASE-TX
		Supported protocols	TCP / IP, FTP, SNTP, BOOTP, EtherNet / IP ^TM^{* 2} , PROFINET ^{* 3} , MC protocol, KV STUDIO
	Serial communication	Communication standard	RS-232C compliant
		communication speed	9600, 19200, 38400, 57600, 115200 bps
		Supported protocols	Stepless, MC protocol, SYSWAY, KV STUDIO
Rated	Power-supply voltage		Control port: DC 24 V ± 10% or Ethernet port: PoE TypeA / B 36 –57 V (simultaneous supply not possible) ^{* 4}
	Current consumption		Control port: 220 mA (at 24 V DC) Ethernet port: PoE power class 2 ^{* 5}
Environmental resistance	Protective structure		IP65
	Ambient illuminance used		Sunlight: 10,000 lux, incandescent lamp: 6,000 lux, fluorescent lamp: 2,000 lux
	Operating ambient temperature		0 to + 45 ° C
	Storage ambient temperature		-10 to + 50 ° C
	Operating ambient humidity		35-95% RH (no condensation)
	Storage ambient humidity
	Atmosphere		No dust or corrosive gas
	Vibration resistant		10-55 Hz, double amplitude 1.5 mm, 55-500 Hz, acceleration 5G, X, Y, Z 3 hours in each direction
mass			About 160 g
^{* 1} Classification is carried out according to the criteria of IEC60825-1 according to Laser Notice No.50 of FDA (CDRH). ^{* 2} EtherNet / IP ^TM is a registered trademark or trademark of ODVA. ^{* 3} PROFINET is a registered trademark or trademark of the Profibus Association. ^{* 4 In} order to comply with CSA No.61010-1 / UL61010-1 / IEC61010-1, a power supply with Class 2 output specified by CEC and NEC, or CSA No. 60950-1 / UL60950-1 Use a power supply with the LPS output specified in / IEC60950-1. ^{* 5 The} maximum current consumption value of PoE power class 2 is 210 mA.

SR-752

Model			SR-752
type			Long-distance type
Light receiving section	Sensor		CMOS image sensor
	Number of pixels		752 x 480 pixels
illumination	light source		Red LED
Laser pointer			Visible light semiconductor laser 660nm
	output		60µW
	pulse width		200µs
	Laser class		Class 1 Laser Products (IEC60825-1, FDA (CDRH) Part 1040.10 ^{* 1} )
Reading specifications	Minimum resolution	2D	0.19Mm 0.33 mm (SR-75L4 is installed), 0.5mm (SR-75L6 is installed)
		barcode	0.17 mm 0.22Mm (SR-75L4 is installed), 0.33mm (SR-75L6 is installed)
	Corresponding symbol	2D	QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF, GS1 Composite (CC-A, CC-B, CC-C)
		barcode	CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN / EAN / UPC, Trioptic CODE39, CODE39 Full ASCII
	Reading distance (typical example)	DataMatrix QR	180 ~ 305 mm (cell size = 0.5 mm) 300 ~ 490 mm (cell size = 0.5mm) (SR-75L4 is installed) 460 ~ 690 mm (cell size = 0.5mm) (SR-75L6 is installed)
		barcode	180-330mm (Narrow bar width = 0.5mm) 250-540mm (Narrow bar width = 0.5mm) (When SR-75L4 is installed) 400-760mm (Narrow bar width = 0.5mm) (When SR-75L6 is installed)
	Focal length		250mm 400mm (when SR-75L4 is installed), 600mm (when SR-75L6 is installed)
	Reading field of view (focal length)		65mm x 41mm 108mm x 69mm (when SR-75L4 is installed), 165mm x 106mm (when SR-75L6 is installed)
Input / output specifications	Control input	Score	2 points
		Input format	Bidirectional voltage input
		Maximum rating	DC26.4V
		Minimum ON voltage	DC15V
		Maximum OFF current	0.2mA or less
	Control output	Score	3 points
		Output format	Photo MOS relay output
		Maximum rating	DC30V
		Maximum load current	1 output: 50mA or less, 3 output total: 100mA or less
		Leakage current when OFF	0.1mA or less
		Residual voltage when ON	1V or less
	Ethernet	Communication standard	10BASE-T / 100BASE-TX
		Supported protocols	TCP / IP, FTP, SNTP, BOOTP, EtherNet / IP ^TM^{* 2} , PROFINET ^{* 3} , MC protocol, KV STUDIO
	Serial communication	Communication standard	RS-232C compliant
		communication speed	9600, 19200, 38400, 57600, 115200 bps
		Supported protocols	Stepless, MC protocol, SYSWAY, KV STUDIO
Rated	Power-supply voltage		Control port: DC 24 V ± 10% or Ethernet port: PoE TypeA / B 36 –57 V (simultaneous supply not possible) ^{* 4}
	Current consumption		Control port: 220 mA (at 24 V DC) Ethernet port: PoE power class 2 ^{* 5}
Environmental resistance	Protective structure		IP65
	Ambient illuminance used		Sunlight: 10,000 lux, incandescent lamp: 6,000 lux, fluorescent lamp: 2,000 lux
	Operating ambient temperature		0 to + 45 ° C
	Storage ambient temperature		-10 to + 50 ° C
	Operating ambient humidity		35-95% RH (no condensation)
	Storage ambient humidity
	Atmosphere		No dust or corrosive gas
	Vibration resistant		10-55 Hz, double amplitude 1.5 mm, 55-500 Hz, acceleration 5G, X, Y, Z 3 hours in each direction
mass			Approximately 175 g Approximately 185 g (when SR-75L4 / L6 is installed)
^{* 1} Classification is carried out according to the criteria of IEC60825-1 according to Laser Notice No.50 of FDA (CDRH). ^{* 2} EtherNet / IP ^TM is a registered trademark or trademark of ODVA. ^{* 3} PROFINET is a registered trademark or trademark of the Profibus Association. ^{* 4 In} order to comply with CSA No.61010-1 / UL61010-1 / IEC61010-1, a power supply with Class 2 output specified by CEC and NEC, or CSA No. 60950-1 / UL60950-1 Use a power supply with the LPS output specified in / IEC60950-1. ^{* 5 The} maximum current consumption value of PoE power class 2 is 210 mA.

SR-75L4

Model			SR-75L4 ^{* 1}
type			400 mm lens attachment for SR-752 only
Reading specifications	Minimum resolution	2D	0.33mm
		barcode	0.22mm
	Reading distance (typical example)	DataMatrix QR	300-490 mm (cell size = 0.5 mm)
		barcode	250-540mm (narrow bar width = 0.5mm)
	Focal length		400mm
	Reading field of view (focal length)		108mm x 69mm
mass			About 10 g
^{* 1} Reading specifications are when attached to SR-752

SR-75L6

Model			SR-75L6 ^{* 1}
type			600 mm lens attachment for SR-752 only
Reading specifications	Minimum resolution	2D	0.5mm
		barcode	0.33mm
	Reading distance (typical example)	DataMatrix QR	460-690mm (cell size = 0.5mm)
		barcode	400-760mm (narrow bar width = 0.5mm)
	Focal length		600mm
	Reading field of view (focal length)		165mm x 106mm
mass			About 10 g
^{* 1} Reading specifications are when attached to SR-752