KEYENCE IL Temassız Lazer mesafe ölçüm sensörleri

KEYENCE IL Temassız CMOS lazer sensörler

KEYENCE IL CMOS algılama teknolojisine sahip mesafe ölçüm sensörleri ile mesafe, kalınlık ve konum ölçümlerinin kararlılıkla yapılmasını sağlar. Nesnelerin yüzeyinden geri yansıyan ışık sensör tarafından hesaplanarak hızlı ve güvenilir şekilde ölçümler yapılır. Koyu renkli hedeflerin düşük ışık geri yansıtması ve parlak nesnelerin yüksek ışık geri yansıtması gibi etkenlerden etkilenmeden ölçümler yapılmasının yanında açılı konumlandırma ve zorlu ortam koşullarından etkilenmeden de kararlı algılamaların yapılmasını sağlar.

Avantajlar

Kısa ve uzun mesafelerde ölçümler için farklı sensör alternatifleri.
Maksimum 3,5m mesafeye kadar kullanım
Yüksek lineerlik (3µ) ve tekrarlanabilirlikte (1µ) ölçümler
Yüksek dinamik range sayesinde metal, ahşap, seramik, plastik gibi nesnelerde hatasız ölçümler
Yansıyan ışık şiddetinin geri bildirim ile kontrol edilebilmesi sayesinde mat ve parlak nesnelerde güvenilir ölçümler
IP67 korumu sınıfı sayesinde zorlu koşullarda kullanım
Çoklu kullanım için ekleme ve çıkarma gibi temel matematiksel işlemlerin otomatik yapılabilmesi
Ölçüm sonuçlarının harici cihazlara alınabilmesi için haberleşme protokol destekleri

Dokümanlar

Keyence Temassız CMOS Lazer Sensörler

Teknik özellikler

IL-030

Model		IL-030
Reference distance		30mm
Measured distance		20-45 mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 1 Laser Products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	220 µW
Spot diameter (at reference distance)		Approximately 200 x 750 µm
Straightness		± 0.1% of FS (when used at 25-35 mm) ^{* 2}^{* 3}
Repeat accuracy		1µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.05% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 5,000 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 60 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-065

Model		IL-065
Reference distance		65mm
Measured distance		55-105mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately 550 x 1750 µm
Straightness		± 0.1% of FS (when used at 55-75 mm) ^{* 2}^{* 3}
Repeat accuracy		2µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.06% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 7,500 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 75 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-100

Model		IL-100
Reference distance		100mm
Measured distance		75-130 mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately 400 x 1350 µm
Straightness		± 0.15% of FS (when used at 80-120 mm) ^{* 2}^{* 3}
Repeat accuracy		4µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.06% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 7,500 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 75 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-1000

Model		IL-1000
type		DIN rail mounting
Master unit / slave unit		Master unit
Head compatibility		Yes
display	Minimum display unit	IL-S025, IL-030: 1µm / IL-S065, IL-065, IL-100, IL-S100: 2µm / IL-300: 10µm / IL-600: 50µm / IL-2000: 100µm
	Display range	IL-S025 / IL-030 / IL-S065 / IL-065 / IL-S100 / IL-100: ± 99.999 to ± 99 mm (4 levels can be selected) IL-300 / IL-600: ± 999.99 mm to ± 999 mm ( 3 levels can be selected) IL-2000: ± 9999.9 to ± 9999 mm (2 levels can be selected)
	Display cycle	Approximately 10 times / sec
Analog voltage output		± 5V, 1-5V, 0-5V Output impedance 100Ω ^{* 1}
Analog current output		4-20mA Maximum load resistance 350Ω ^{* 1}
Control input	Bank switching input	No voltage input ^{* 2}
	Zero shift input
	Flood stop input
	Timing input
	Reset input
Control output	Judgment output	Open collector output (NPN, PNP switchable, NO, NC switchable) ^{* 3}
	Alarm output	Open collector output (NPN, PNP switchable / NC) ^{* 3}
Power supply	Power-supply voltage	DC10-30 V Ripple (PP) 10% included, Class2 ^{* 4}
	power consumption	2300mW or less (at 30V, 77mA or less)
Environmental resistance	Pollution degree	2
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case / front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
mass		Approximately 150 g (including accessories)
^{* 1} Select and use any of ± 5V, 1-5V, 0-5V, and 4-20mA. ^{* 2} Use any input assigned to 4 external input lines. ^{* 3}・ Maximum NPN open collector output rating is 50mA / ch (20mA / ch when adding a slave unit) 30V or less Residual voltage 1V or less (1.5V or less when adding 6 or more units including the master unit) ・ PNP open collector output The maximum rating is 50mA / ch (20mA / ch when adding a slave unit) Power supply voltage or less Residual voltage 2V or less (2.5V or less when adding 6 or more units including the master unit) ^{* 4} Power supply voltage when adding 6 or more units Please use at 20 to 30V.

IL-1050

Model		IL-1050
type		DIN rail mounting
Master unit / slave unit		Cordless handset
Head compatibility		Yes
display	Minimum display unit	IL-S025, IL-030: 1µm / IL-S065, IL-065, IL-100, IL-S100: 2µm / IL-300: 10µm / IL-600: 50µm / IL-2000: 100µm
	Display range	IL-S025 / IL-030 / IL-S065 / IL-065 / IL-S100 / IL-100: ± 99.999 to ± 99 mm (4 levels can be selected) IL-300 / IL-600: ± 999.99 mm to ± 999 mm ( 3 levels can be selected) IL-2000: ± 9999.9 to ± 9999 mm (2 levels can be selected)
	Display cycle	Approximately 10 times / sec
Analog voltage output		None
Analog current output
Control input	Bank switching input	No voltage input ^{* 1}
	Zero shift input
	Flood stop input
	Timing input
	Reset input
Control output	Judgment output	Open collector output (NPN, PNP switchable, NO, NC switchable) ^{* 2}
	Alarm output	Open collector output (NPN, PNP switchable / NC) ^{* 2}
Power supply	Power-supply voltage	Supplied from the base unit ^{* 3}
	power consumption	2000mW or less (at 30V, 67mA or less)
Environmental resistance	Pollution degree	2
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case / front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
mass		Approximately 140 g (including accessories)
^{* 1} Use any input assigned to 4 external input lines. ^{* 2}・ Maximum NPN open collector output rating is 50mA / ch (20mA / ch when adding a slave unit) 30V or less Residual voltage 1V or less (1.5V or less when adding 6 or more units including the master unit) ・ PNP open collector output The maximum rating is 50mA / ch (20mA / ch when adding a slave unit) Power supply voltage or less Residual voltage 2V or less (2.5V or less when adding 6 or more units including the master unit) ^{* 3} Power supply voltage when adding 6 or more units Please use at 20 to 30V.

IL-1500

Model		IL-1500
type		Panel mounting
Master unit / slave unit		Master unit
Head compatibility		Yes
display	Minimum display unit	IL-S025, IL-030: 1µm / IL-S065, IL-065, IL-100, IL-S100: 2µm / IL-300: 10µm / IL-600: 50µm / IL-2000: 100µm
	Display range	IL-S025 / IL-030 / IL-S065 / IL-065 / IL-S100 / IL-100: ± 99.999 to ± 99 mm (4 levels can be selected) IL-300 / IL-600: ± 999.99 mm to ± 999 mm ( 3 levels can be selected) IL-2000: ± 9999.9 to ± 9999 mm (2 levels can be selected)
	Display cycle	Approximately 10 times / sec
Analog voltage output		± 5V, 1-5V, 0-5V Output impedance 100Ω ^{* 1}
Analog current output		4-20mA Maximum load resistance 350Ω ^{* 1}
Control input	Bank switching input	No voltage input ^{* 2}
	Zero shift input
	Flood stop input
	Timing input
	Reset input
Control output	Judgment output	Open collector output (NPN, PNP switchable, NO, NC switchable) ^{* 3}
	Alarm output	Open collector output (NPN, PNP switchable / NC) ^{* 3}
Power supply	Power-supply voltage	DC10-30 V Ripple (PP) 10% included, Class2 ^{* 4}
	power consumption	2500mW or less (at 30V, 84mA or less)
Environmental resistance	Pollution degree	2
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case / front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
mass		Approximately 170 g (including accessories)
^{* 1} Select and use any of ± 5V, 1-5V, 0-5V, and 4-20mA. ^{* 2} Use any input assigned to 4 external input lines. ^{* 3}・ Maximum NPN open collector output rating is 50mA / ch (20mA / ch when adding a slave unit) 30V or less Residual voltage 1V or less (1.5V or less when adding 6 or more units including the master unit) ・ PNP open collector output The maximum rating is 50mA / ch (20mA / ch when adding a slave unit) Power supply voltage or less Residual voltage 2V or less (2.5V or less when adding 6 or more units including the master unit) ^{* 4} Power supply voltage when adding 6 or more units Please use at 20 to 30V.

IL-1550

specification

Model		IL-1550
type		Panel mounting
Master unit / slave unit		Cordless handset
Head compatibility		Yes
display	Minimum display unit	IL-S025, IL-030: 1µm / IL-S065, IL-065, IL-100, IL-S100: 2µm / IL-300: 10µm / IL-600: 50µm / IL-2000: 100µm
	Display range	IL-S025 / IL-030 / IL-S065 / IL-065 / IL-S100 / IL-100: ± 99.999 to ± 99 mm (4 levels can be selected) IL-300 / IL-600: ± 999.99 mm to ± 999 mm ( 3 levels can be selected) IL-2000: ± 9999.9 to ± 9999 mm (2 levels can be selected)
	Display cycle	Approximately 10 times / sec
Analog voltage output		None
Analog current output
Control input	Bank switching input	No voltage input ^{* 1}
	Zero shift input
	Flood stop input
	Timing input
	Reset input
Control output	Judgment output	Open collector output (NPN, PNP switchable, NO, NC switchable) ^{* 2}
	Alarm output	Open collector output (NPN, PNP switchable / NC) ^{* 2}
Power supply	Power-supply voltage	Supplied from the base unit ^{* 3}
	power consumption	2200mW or less (at 30V, 74mA or less)
Environmental resistance	Pollution degree	2
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case / front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
mass		Approximately 160 g (including accessories)
^{* 1} Use any input assigned to 4 external input lines. ^{* 2}・ Maximum NPN open collector output rating is 50mA / ch (20mA / ch when adding a slave unit) 30V or less Residual voltage 1V or less (1.5V or less when adding 6 or more units including the master unit) ・ PNP open collector output The maximum rating is 50mA / ch (20mA / ch when adding a slave unit) Power supply voltage or less Residual voltage 2V or less (2.5V or less when adding 6 or more units including the master unit) ^{* 3} Power supply voltage when adding 6 or more units Please use at 20 to 30V.

IL-2000

Model		IL-2000 ^{* 1}
Reference distance		2000mm
Measured distance		1000-3500mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 2} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately 1400 x 7000 µm
Straightness		± 0.16% of FS (when used at 1000 to 3500 mm) ^{* 3}^{* 4}
Repeat accuracy		100µm ^{* 5}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.016% of FS / ℃ ^{* 4}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 10,000 lux ^{* 6}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 350 g
^{* 1} Cannot be used with amplifier units purchased before August 8, 2012 ^{* 2} Classified according to IEC60825-1 according to the provisions of Laser Notice No.50 of FDA (CDRH). doing. ^{* 3} This is the value when measuring our standard object (white diffused object). ^{* 4} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 5} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 6} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-300

Model		IL-300
Reference distance		300mm
Measured distance		160-450mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately ø500 µm
Straightness		± 0.25% of FS (when used at 160-440 mm) ^{* 2}^{* 3}
Repeat accuracy		30µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.08% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 5,000 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 135 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-600

Model		IL-600
Reference distance		600mm
Measured distance		200-1000mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately ø1600µm
Straightness		± 0.25% of FS (when used at 200 to 600 mm) ^{* 2}^{* 3} ± 0.5% of FS (when used at 200 to 1000 mm) ^{* 2}^{* 3}
Repeat accuracy		50µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.08% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 5,000 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 135 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-600

Model		IL-600
Reference distance		600mm
Measured distance		200-1000mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 1} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately ø1600µm
Straightness		± 0.25% of FS (when used at 200 to 600 mm) ^{* 2}^{* 3} ± 0.5% of FS (when used at 200 to 1000 mm) ^{* 2}^{* 3}
Repeat accuracy		50µm ^{* 4}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.08% of FS / ℃ ^{* 3}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 5,000 lux ^{* 5}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 135 g
^{* 1 In accordance with the} FDA (CDRH) Laser Notice No. 50, classification is carried out according to the IEC 60825-1 standard. ^{* 2} This is the value when measuring our standard object (white diffused object). ^{* 3} The FS of each model is as shown on the right. IL-030: ± 5mm, IL-065: ± 10mm, IL-100: ± 20mm, IL-300: ± 140mm, IL-600: ± 400mm, IL-2000: + 1000mm ~ -1500mm ^{* 4} Our standard object This is the value when (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. (2ms for IL-300 / 600, 5ms for IL-2000) ^{* 5} This is the value when the sampling period is set to 2 ms or 5 ms.

IL-S025

Model		IL-S025 ^{* 1}
Reference distance		25mm
Measured distance		20-30mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 2} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately 25 x 1200 µm
Straightness		± 0.075% of F.S. (when used at 20 to 25 mm) ^{* 3}^{* 4} ± 0.1% of F.S. (when used at 20 to 30 mm) ^{* 3}^{* 4}
Repeat accuracy		1µm ^{* 5}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.03% of F.S./ ℃ ^{* 4}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 10,000 lux ^{* 6}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 60 g
^{* 1} Cannot be used with amplifier units purchased before December 21, 2010 ^{* 2} Classified according to IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No.50. I am. ^{* 3} This is the value when measuring our standard object (white diffused object). ^{* 4} The FS of each model is as shown on the right. IL-S025: ± 5mm, IL-S065: ± 10mm, IL-S100: ± 30mm ^{* 5} Values when our standard object (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. is. ^{* 6} Value when the sampling period is set to 2 ms or 5 ms.

IL-S065

Model		IL-S065 ^{* 1}
Reference distance		65mm
Measured distance		55-75mm
light source	type	Red semiconductor laser Wavelength: 655nm (visible light)
	Laser class	Class 2 laser products (FDA (CDRH) Part1040.10 ^{* 2} , IEC 60825-1)
	output	560 µW
Spot diameter (at reference distance)		Approximately 55 x 1700 µm
Straightness		± 0.05% of F.S. (when used at 55-65 mm) ^{* 3}^{* 4} ± 0.075% of F.S. (when used at 55-75 mm) ^{* 3}^{* 4}
Repeat accuracy		2µm ^{* 5}
Sampling cycle		0.33 / 1/2 / 5ms (4 steps variable)
Operation indicator		Laser flood warning light: green LED, analog range indicator light: orange LED, reference distance indicator light: red / green LED
Temperature characteristics		0.02% of F.S./ ℃ ^{* 4}
Environmental resistance	Protective structure	IP67
	Pollution degree	3
	Ambient illuminance used	Incandescent lamp: 10,000 lux ^{* 6}
	Operating ambient temperature	-10 to + 50 ° C (no condensation or freezing)
	Operating ambient humidity	35-85% RH (no condensation)
	Vibration resistant	10-55 Hz, double amplitude 1.5 mm, X, Y, Z 2 hours in each direction
Material		Body case: PBT, metal part: SUS304, packing: NBR, lens cover: glass, cable: PVC
mass		About 75 g
^{* 1} Cannot be used with amplifier units purchased before December 21, 2010 ^{* 2} Classified according to IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No.50. I am. ^{* 3} This is the value when measuring our standard object (white diffused object). ^{* 4} The FS of each model is as shown on the right. IL-S025: ± 5mm, IL-S065: ± 10mm, IL-S100: ± 30mm ^{* 5} Values when our standard object (white diffused object) is measured at a reference distance with a sampling period of 1 ms and an average of 128 times. is. ^{* 6} Value when the sampling period is set to 2 ms or 5 ms.